Linear Actuators » Glideforce Light-Duty (LD) Linear Actuators » 5:1 Glideforce LD Linear Actuators »
Glideforce LACT10P-12V-05 Light-Duty Linear Actuator with Feedback: 15kgf, 10" Stroke (9.8" Usable), 1.7"/s, 12V
This 12 V light-duty (LD) linear actuator with a 5:1 gear reduction can lift loads up to 15 kgf [34 lbs or 150 N] and can withstand static loads up to 250 kgf [550 lbs or 2500 N]. It has a maximum speed of 43.9 mm/s [1.73″/s] at no load and 36.5 mm/s [1.44″/s] at the maximum load. Limit switches at each end make the actuator easy to control over its full range of motion. The shaft holds its position when unpowered. This version has a 10-inch stroke (9.8″ usable) and a feedback potentiometer that lets you determine where the actuator is in its stroke.
Alternatives available with variations in these parameter(s): nominal stroke length feedback potentiometer included? linear speed @ 12V, no load Select variant…
| Description | Specs (18) | Pictures (10) | Resources (7) | FAQs (0) | On the blog (1) |
|---|
 |
Glideforce Light-Duty (LD) series of linear actuators. |
|---|
 |
Glideforce Light-Duty (LD) series of linear actuators with feedback. |
|---|
 |
Connectors that terminate the cable ends of Glideforce Light-Duty (LD) linear actuators with feedback. |
|---|
 |
Dimensions of Glideforce LD linear actuators with feedback. Units are mm. |
|---|
 |
Glideforce Light-Duty (LD) series of linear actuators without feedback. |
|---|
 |
Unterminated wire ends for Glideforce Light-Duty (LD) linear actuators without feedback. |
|---|
 |
Dimensions of Glideforce LD linear actuators without feedback. Units are mm. |
|---|
 |
Glideforce Light-Duty linear actuator (4″ stroke) with shaft fully extended. |
|---|
 |
Connecting the bracket to one end of a Concentric LD linear actuator. |
|---|
 |
Connecting a light-duty linear actuator with feedback to a Jrk 21v3 motor controller. |
|---|
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
