Mechanical Components »
Hardware
Compare all products in this category
Subcategories
These adapters let you connect an assortment of wheels and other mechanisms to a variety of gearmotor output shafts.
Add a second level to your project, separate components, and mount parts with these male-female metal standoffs.
Similar to elongated hex nuts, these aluminum standoffs have threading all the way through their bodies and can be used to separate stacked components or chassis tiers.
Secure parts to your project with these nuts and screws, available in a variety of sizes and lengths.
The Pololu RP5/Rover 5 expansion plates are cut from 1/8″ acrylic in a variety of colors and make it easy to mount components on the Rover 5 tracked chassis. They can also be used without a chassis as universal mounting plates for your project electronics.
Accessories and replacement parts for your servos.
Products in category “Hardware”
| Pololu item #: 2688 | |
| Brand: Generic | supply outlook |
|
This copper alloy traveling nut is intended for use with Tr8×8(P2) threaded rods and features a mounting flange with four holes threaded for M3 screws. This is the same nut that is included with our stepper motors with lead screw.
| Pololu item #: 79 | |
| Brand: Tamiya | |
|
|
The Tamiya 70098 Universal Plate Set provides a reconfigurable platform for building your own robot chassis. The set comes with a plate with gridded mounting holes, angle brackets, and mounting hardware that lets you mount mechanical components in a variety of positions.
| Pololu item #: 86 | |
| Brand: Tamiya | |
|
|
The Tamiya 70157 Universal Plate Set (2pcs.) provides a reconfigurable platform for building your own robot chassis. The set comes with two plates with gridded mounting holes, angle brackets, and mounting pins that let you mount mechanical components in a variety of positions.
| Pololu item #: 734 | |
| Brand: Tamiya | |
|
|
The Tamiya 70172 Universal Plate L (210 x 160 mm) provides a reconfigurable platform for building your own robot chassis. The set comes with a plate with gridded mounting holes, angle brackets, and mounting hardware that lets you mount mechanical components in a variety of positions.
| Pololu item #: 88 | |
| Brand: Tamiya | |
|
|
The Tamiya 70143 Universal Arm Set can be used to make crank systems, link systems, and structures for your robot. The 41-hole arms consist of 3 mm holes spaced 5 mm apart making the arm set compatible with many Tamiya products and sets.
| Pololu item #: 89 | |
| Brand: Tamiya | |
|
|
The Tamiya 70156 Long Universal Arm Set can be used to make crank systems, link systems, and structures for your robot. The 41-hole arms consist of 3 mm holes spaced 5 mm apart making the arm set compatible with many Tamiya products and sets.
| Pololu item #: 78 | |
| Brand: Tamiya | |
|
|
EU restrictions |
The Tamiya 70105 3mm Diameter Shaft Set provides an assortment of hexagonal and round shafts for mounting wheels and pulleys to your robot. The 3 mm diameter of the shafts makes them compatible with the Tamiya gearboxes with 3 mm hexagonal shafts and with other Tamiya products.
| Pololu item #: 733 | |
| Brand: Tamiya | |
|
|
EU restrictions |
The Tamiya 70171 3mm Threaded Shaft Set includes ball joints so you can make control rods with three-dimensional movement. The two threaded shafts are also useful for mounting pulleys.
| Pololu item #: 90 | |
| Brand: Tamiya | |
|
|
EU restrictions |
The Tamiya 70164 Universal Metal Joint Parts (4pcs) enable you to easily connect Tamiya products or other mechanical parts to your robot or other project.
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
