Motors and Gearboxes » Linear Actuators » Glideforce Light-Duty (LD) Linear Actuators »
Mounting Bracket for Glideforce Light-Duty Linear Actuators - Aluminum
This bracket was designed specifically for the Glideforce Light-Duty (LD) linear actuators. It is machined out of a single piece of aluminum and has been tested to 310 kgf [700 lbs or 3100 N] of static load, which is well above the highest static loads the LD actuators are rated for. The mounting pin has a 0.248″ (6.3 mm) diameter. This bracket is sold individually, and two brackets are required for each linear actuator.
Compare all products in Glideforce Light-Duty (LD) Linear Actuators or Motor Brackets.
| Description | Specs (1) | Pictures (2) | Resources (1) | FAQs (0) | On the blog (2) | Distributors (37) |
|---|
See the bracket datasheet (325k pdf) for dimensions.
 |
Connecting the bracket to one end of a Concentric LD linear actuator. |
|---|
Note: As of September 2017, this product no longer includes mounting screws, and mounting pin is now held in place with a R-clip.
This product is Concentric part number LA-LD-BRACKET.
People often buy this product together with:
 |
Jrk 21v3 USB Motor Controller with Feedback (Connectors Soldered) |
 |
Glideforce LACT2P-12V-20 Light-Duty Linear Actuator with Feedback: 50kgf, 2" Stroke (1.97" Usable), 0.57"/s, 12V |
 |
Glideforce LACT4P-12V-20 Light-Duty Linear Actuator with Feedback: 50kgf, 4" Stroke (3.9" Usable), 0.57"/s, 12V |
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
