Linear Actuators » Glideforce Light-Duty (LD) Linear Actuators » 5:1 Glideforce LD Linear Actuators »
Glideforce LACT2-12V-05 Light-Duty Linear Actuator: 15kgf, 2" Stroke (1.97" Usable), 1.7"/s, 12V
This 12 V light-duty (LD) linear actuator with a 5:1 gear reduction can lift loads up to 15 kgf [34 lbs or 150 N] and can withstand static loads up to 250 kgf [550 lbs or 2500 N]. It has a maximum speed of 43.9 mm/s [1.73″/s] at no load and 36.5 mm/s [1.44″/s] at the maximum load. Limit switches at each end make the actuator easy to control over its full range of motion. The shaft holds its position when unpowered. This version has a 2-inch stroke (1.97″ usable) and no feedback potentiometer.
Alternatives available with variations in these parameter(s): nominal stroke length feedback potentiometer included? linear speed @ 12V, no load Select variant…
Description | Specs (18) | Pictures (10) | Resources (7) | FAQs (0) | On the blog (1) |
---|
Dimensions
Nominal stroke length: | 2 in |
---|---|
Actual stroke length: | 1.97 in |
Retracted length: | 6.22 in |
Extended length: | 8.19 in |
Weight: | 0.86 kg |
General specifications
Gear ratio: | 5:1 |
---|---|
Current @ 12V, no load: | 1.2 A |
Current @ 12V, max load: | 3.2 A |
Stall current @ 12V: | 7 A1 |
Linear speed @ 12V, no load: | 1.7 in/s |
Linear speed @ 12V, max load: | 1.4 in/s |
Max linear force @ 12V: | 34 lb2 |
Maximum duty cycle: | 25%3 |
Feedback potentiometer included?: | N |
Limit switches included?: | Y |
Minimum operating temperature: | -25.0 °C |
Maximum operating temperature: | 65 °C |
IP rating: | IP654 |
Notes:
- 1
- This represents the maximum in-rush current when starting a stationary actuator. These actuators are NOT intended to be stalled, and they will not stall as long as maximum load ratings are respected.
- 2
- This is a dynamic load rating. The actuator is rated to withstand 500 lbs when not moving.
- 3
- Or one minute of continuous operation in four minutes.
- 4
- Total dust protection, water resistant.