Linear Actuators » Glideforce Light-Duty (LD) Linear Actuators » 20:1 Glideforce LD Linear Actuators »
Glideforce LACT2P-12V-20 Light-Duty Linear Actuator with Feedback: 50kgf, 2" Stroke (1.97" Usable), 0.57"/s, 12V
This 12 V light-duty (LD) linear actuator with a 20:1 gear reduction can lift loads up to 50 kgf [110 lbs or 500 N] and can withstand static loads up to 250 kgf [550 lbs or 2500 N]. It has a maximum speed of 14.6 mm/s [0.57″/s] at no load and 12.3 mm/s [0.48″/s] at the maximum load. Limit switches at each end make the actuator easy to control over its full range of motion. The shaft holds its position when unpowered. This version has a 2-inch stroke (1.97″ usable) and a feedback potentiometer that lets you determine where the actuator is in its stroke.
Alternatives available with variations in these parameter(s): nominal stroke length feedback potentiometer included? linear speed @ 12V, no load Select variant…
Compare all products in 20:1 Glideforce LD Linear Actuators.
| Description | Specs (18) | Pictures (10) | Resources (7) | FAQs (0) | On the blog (0) | Distributors (37) |
|---|
Dimensions
| Nominal stroke length: | 2 in |
|---|---|
| Actual stroke length: | 1.97 in |
| Retracted length: | 7.68 in |
| Extended length: | 9.65 in |
| Weight: | 1.10 kg |
General specifications
| Gear ratio: | 20:1 |
|---|---|
| Current @ 12V, no load: | 1.2 A |
| Current @ 12V, max load: | 3.2 A |
| Stall current @ 12V: | 7 A1 |
| Linear speed @ 12V, no load: | 0.57 in/s |
| Linear speed @ 12V, max load: | 0.48 in/s |
| Max linear force @ 12V: | 110 lb2 |
| Maximum duty cycle: | 25%3 |
| Feedback potentiometer included?: | Y |
| Limit switches included?: | Y |
| Minimum operating temperature: | -25.0 °C |
| Maximum operating temperature: | 65 °C |
| IP rating: | IP654 |
Notes:
- 1
- This represents the maximum in-rush current when starting a stationary actuator. These actuators are NOT intended to be stalled, and they will not stall as long as maximum load ratings are respected.
- 2
- This is a dynamic load rating. The actuator is rated to withstand 500 lbs when not moving.
- 3
- Or one minute of continuous operation in four minutes.
- 4
- Total dust protection, water resistant.
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
