Motors and Gearboxes » Linear Actuators » Glideforce Industrial-Duty (ID) Linear Actuators »
Glideforce LACT12-1000BL Industrial-Duty Linear Actuator with Ball Screw Drive: 450kgf, 12" Stroke (10.8" Usable), 0.66"/s, 12V
This 12 V industrial-duty (ID) linear actuator uses an efficient ball screw drive to lift loads up to 450 kgf [1000 lbs or 4500 N] and withstand static loads up to 1360 kgf [3000 lbs or 13,600 N]. It has a maximum speed of 16.8 mm/s [0.66″/s] at no load and 14.3 mm/s [0.56″/s] at the maximum load. Limit switches at each end make the actuator easy to control over its full range of motion, and an overload clutch protects the actuator from being damaged by excessive loads. The shaft holds its position when unpowered. This version has a 12-inch stroke (10.8″ usable) and no feedback potentiometer.
Alternatives available with variations in these parameter(s): max linear force @ 12V nominal stroke length feedback potentiometer included? Select variant…
Compare all products in Glideforce Industrial-Duty (ID) Linear Actuators.
| Description | Specs (20) | Pictures (7) | Resources (4) | FAQs (0) | On the blog (0) |
|---|
 |
Glideforce Industrial-Duty (ID) series of linear actuators. |
|---|
 |
Glideforce Industrial-Duty (ID) linear actuator with a 12″ stroke. |
|---|
 |
Unterminated wire ends for Glideforce Industrial-Duty (ID) linear actuators with feedback. |
|---|
 |
Unterminated wire ends for Glideforce Industrial-Duty (ID) linear actuators without feedback. |
|---|
 |
Dimensions of Glideforce ID linear actuators with limit switches (LACTx-500AL, LACTx-500APL, LACTx-1000BL, and LACTx-1000BPL). Units are mm. |
|---|
 |
Glideforce LACT4 industrial-duty linear actuator (4″ stroke) with shaft fully extended. |
|---|
 |
Connecting an industrial-duty linear actuator with feedback to a Jrk 24v13 motor controller. |
|---|
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
