Electronics » Sensors » Current Sensors »
ACS711 Current Sensor Carriers
 |
 |
We are offering these breakout boards with support from Allegro Microsystems as an easy way to use or evaluate their ACS711EX Hall effect-based, electrically isolated current sensors. The following list details some of the sensor’s key features:
- Hall effect-based sensor with electrically isolated current path allows the sensor to be inserted anywhere along the current path and to be used in applications that require electrical isolation.
- Conductive path internal resistance is typically 0.6 mΩ, and the PCB is made with 2-oz copper, so very little power is lost in the board.
- 100 kHz bandwidth analog output voltage proportional to AC or DC currents.
- Good accuracy and reliability: factory calibration results in a typical total output error of ±5% at room temperature, the output offset voltage is extremely stable, and the sensor has zero magnetic hysteresis.
- Overcurrent FAULT output latches low when current magnitude exceeds the optimized sensing range.
- Operating temperature range of -40°C to 125°C.
- 0.7″×0.8″ carrier board offers a variety of ways to insert it into the current path and 0.1″-pitch (breadboard compatible) power, ground, and output pins.
They operate from 3 V to 5.5 V, so they can interface directly with 3.3 V and 5 V systems.
Compare all products in this category
Products in category “ACS711 Current Sensor Carriers”
| Pololu item #: 2452 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
This board is a simple carrier of Allegro’s ACS711KEXLT-15AB-T Hall effect-based, electrically isolated current sensor, which offers a low-resistance (~0.6 mΩ) current path and a 100 kHz bandwidth for fast response times.
| Part Suffix | Range | Sensitivity @ 3.3 V | Zero Point @ 3.3 V | Fault Trip Level | Supply Voltage |
|---|---|---|---|---|---|
| KEXLT-15AB-T | ±15.5 A (bidirectional) | 90 mV/A | 1.65 V | ±15.5 A | 3 V to 5.5 V |
| Pololu item #: 2453 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This board is a simple carrier of Allegro’s ACS711KEXLT-31AB-T Hall effect-based, electrically isolated current sensor, which offers a low-resistance (~0.6 mΩ) current path and a 100 kHz bandwidth for fast response times.
| Part Suffix | Range | Sensitivity @ 3.3 V | Zero Point @ 3.3 V | Fault Trip Level | Supply Voltage |
|---|---|---|---|---|---|
| KEXLT-31AB-T | ±31 A (bidirectional) | 45 mV/A | 1.65 V | ±31 A | 3 V to 5.5 V |
Related products
Related categories
Coupon Discount
BF24C315: Get one or more items from category ACS711 Current Sensor Carriers at $2.50 (limit 5 per item). This offer is valid from 26 Nov 2024 to 02 Dec 2024.
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
