Voltage Regulators and Power Supplies » Step-Up/Step-Down Voltage Regulators » S13VxFx Step-Up/Step-Down Voltage Regulators »
7.5V, 2.5A Step-Up/Step-Down Voltage Regulator S13V25F7
| Output voltage | Typical max output current* |
Input voltage range | Size | Optional enable input |
Reverse voltage protection |
|---|---|---|---|---|---|
| 7.5 V | 2.5 A | 2.8 V – 22 V | 0.9″ × 0.9″ | Up to 20 V |
Note 1: For input voltages close to the output. Actual achievable maximum continuous current is a function of input voltage and is limited by thermal dissipation. See the output current graphs on the product page for more information.
Alternatives available with variations in these parameter(s): output voltage Select variant…
Compare all products in S13VxFx Step-Up/Step-Down Voltage Regulators.
| Description | Specs (11) | Pictures (16) | Resources (3) | FAQs (0) | On the blog (1) | Distributors (43) |
|---|
Dimensions
| Size: | 0.9″ × 0.9″ × 0.38″1 |
|---|---|
| Weight: | 3.8 g2 |
General specifications
| Minimum operating voltage: | 2.8 V |
|---|---|
| Maximum operating voltage: | 22 V |
| Continuous output current: | 2.5 A3 |
| Output voltage: | 7.5 V |
| Reverse voltage protection?: | Y4 |
| Maximum quiescent current: | 25 mA5 |
| Output type: | fixed 7.5V |
Identifying markings
| PCB dev codes: | reg29b |
|---|---|
| Other PCB markings: | 0J14085 |
Notes:
- 1
- Without included optional headers or terminal blocks. Height with terminal blocks installed is approximately 0.5″.
- 2
- Without included optional headers or terminal blocks.
- 3
- Under typical conditions, where the input voltage is close to the output voltage. Actual achievable continuous output current is a function of input voltage and is limited by thermal dissipation. See the output current graph under the description tab for more information.
- 4
- To -20 V. Connecting supplies over 20 V in reverse can damage the device.
- 5
- While enabled with no load. See the quiescent current graph under the description tab for more information. Can be reduced to under 1 mA using the enable pin.
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Lists | Distributors | BIG Order Form | About | Contact
© 2001–2025 Pololu Corporation
