Motors and Gearboxes » Linear Actuators » Glideforce Medium-Duty (MD) Linear Actuators »
Glideforce MD122012 Medium-Duty Linear Actuator: 100kgf, 12" Stroke (11.8" Usable), 0.58"/s, 12V
This 12 V medium-duty (MD) linear actuator can lift loads up to 100 kgf [225 lbs or 1000 N] and can withstand static loads up to 450 kgf [1000 lbs or 4500 N]. It has a maximum speed of 14.7 mm/s [0.58″/s] at no load and 10.4 mm/s [0.41″/s] at the maximum load. Limit switches at each end make the actuator easy to control over its full range of motion. The shaft holds its position when unpowered. This version has a 12-inch stroke (11.8″ usable) and a no feedback potentiometer.
Alternatives available with variations in these parameter(s): nominal stroke length feedback potentiometer included? Select variant…
Compare all products in Glideforce Medium-Duty (MD) Linear Actuators.
Description | Specs (18) | Pictures (9) | Resources (3) | FAQs (0) | On the blog (0) |
---|
Dimensions
Nominal stroke length: | 12 in |
---|---|
Actual stroke length: | 11.81 in |
Retracted length: | 15.94 in |
Extended length: | 27.76 in |
Weight: | 1.35 kg |
General specifications
Gear ratio: | 20:1 |
---|---|
Current @ 12V, no load: | 1.1 A |
Current @ 12V, max load: | 4.6 A |
Stall current @ 12V: | 14 A1 |
Linear speed @ 12V, no load: | 0.58 in/s |
Linear speed @ 12V, max load: | 0.41 in/s |
Max linear force @ 12V: | 225 lb2 |
Maximum duty cycle: | 25%3 |
Feedback potentiometer included?: | N |
Limit switches included?: | Y |
Minimum operating temperature: | -25.0 °C |
Maximum operating temperature: | 65 °C |
IP rating: | IP654 |
Notes:
- 1
- This represents the maximum in-rush current when starting a stationary actuator. These actuators are NOT intended to be stalled, and they will not stall as long as maximum load ratings are respected.
- 2
- This is a dynamic load rating. The actuator is rated to withstand 1000 lbs when not moving.
- 3
- Or one minute of continuous operation in four minutes.
- 4
- Total dust protection, water resistant.