Motors and Gearboxes » Linear Actuators » Glideforce Medium-Duty (MD) Linear Actuators »
Glideforce MD122008 Medium-Duty Linear Actuator: 100kgf, 8" Stroke (7.8" Usable), 0.58"/s, 12V
This 12 V medium-duty (MD) linear actuator can lift loads up to 100 kgf [225 lbs or 1000 N] and can withstand static loads up to 450 kgf [1000 lbs or 4500 N]. It has a maximum speed of 14.7 mm/s [0.58″/s] at no load and 10.4 mm/s [0.41″/s] at the maximum load. Limit switches at each end make the actuator easy to control over its full range of motion. The shaft holds its position when unpowered. This version has an 8-inch stroke (7.8″ usable) and a no feedback potentiometer.
Alternatives available with variations in these parameter(s): nominal stroke length feedback potentiometer included? Select variant…
Compare all products in Glideforce Medium-Duty (MD) Linear Actuators.
Description | Specs (18) | Pictures (9) | Resources (3) | FAQs (0) | On the blog (0) |
---|
Dimensions
Nominal stroke length: | 8 in |
---|---|
Actual stroke length: | 7.87 in |
Retracted length: | 12.01 in |
Extended length: | 19.88 in |
Weight: | 1.17 kg |
General specifications
Gear ratio: | 20:1 |
---|---|
Current @ 12V, no load: | 1.1 A |
Current @ 12V, max load: | 4.6 A |
Stall current @ 12V: | 14 A1 |
Linear speed @ 12V, no load: | 0.58 in/s |
Linear speed @ 12V, max load: | 0.41 in/s |
Max linear force @ 12V: | 225 lb2 |
Maximum duty cycle: | 25%3 |
Feedback potentiometer included?: | N |
Limit switches included?: | Y |
Minimum operating temperature: | -25.0 °C |
Maximum operating temperature: | 65 °C |
IP rating: | IP654 |
Notes:
- 1
- This represents the maximum in-rush current when starting a stationary actuator. These actuators are NOT intended to be stalled, and they will not stall as long as maximum load ratings are respected.
- 2
- This is a dynamic load rating. The actuator is rated to withstand 1000 lbs when not moving.
- 3
- Or one minute of continuous operation in four minutes.
- 4
- Total dust protection, water resistant.