Glideforce MD122006-P Medium-Duty Linear Actuator with Feedback: 100kgf, 6" Stroke (5.9" Usable), 0.58"/s, 12V

Pololu item #: 3614
Brand: Concentric
RoHS 3 compliant

Price break Unit price (US$)
1 262.95
5 249.80


backorders allowed

This 12 V medium-duty (MD) linear actuator can lift loads up to 100 kgf [225 lbs or 1000 N] and can withstand static loads up to 450 kgf [1000 lbs or 4500 N]. It has a maximum speed of 14.7 mm/s [0.58″/s] at no load and 10.4 mm/s [0.41″/s] at the maximum load. Limit switches at each end make the actuator easy to control over its full range of motion. The shaft holds its position when unpowered. This version has a 6-inch stroke (5.9″ usable) and a feedback potentiometer that lets you determine where the actuator is in its stroke.

Alternatives available with variations in these parameter(s): nominal stroke length feedback potentiometer included? Select variant…

 Description Specs (18) Pictures (9) Resources (3) FAQs (0) On the blog (0) 

Dimensions

Nominal stroke length: 6 in
Actual stroke length: 5.91 in
Retracted length: 11.50 in
Extended length: 17.41 in
Weight: 1.20 kg

General specifications

Gear ratio: 20:1
Current @ 12V, no load: 1.1 A
Current @ 12V, max load: 4.6 A
Stall current @ 12V: 14 A1
Linear speed @ 12V, no load: 0.58 in/s
Linear speed @ 12V, max load: 0.41 in/s
Max linear force @ 12V: 225 lb2
Maximum duty cycle: 25%3
Feedback potentiometer included?: Y
Limit switches included?: Y
Minimum operating temperature: -25.0 °C
Maximum operating temperature: 65 °C
IP rating: IP654

Notes:

1
This represents the maximum in-rush current when starting a stationary actuator. These actuators are NOT intended to be stalled, and they will not stall as long as maximum load ratings are respected.
2
This is a dynamic load rating. The actuator is rated to withstand 1000 lbs when not moving.
3
Or one minute of continuous operation in four minutes.
4
Total dust protection, water resistant.

Related Products

Mounting Bracket for Glideforce Medium-Duty Linear Actuators - Aluminum
Mounting Bracket for Glideforce Medium-Duty Linear Actuators - Steel
10ft Extension Cable for Glideforce Light-Duty/Medium-Duty Linear Actuators with Feedback
Jrk G2 24v13 USB Motor Controller with Feedback
High-Power Simple Motor Controller G2 18v15 (Connectors Soldered)
VNH5019 Motor Driver Carrier
Stepper Motor with 28cm Lead Screw: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase

Related Categories

Glideforce Medium-Duty (MD) Linear Actuators
Glideforce Industrial-Duty (ID) Linear Actuators
Glideforce Light-Duty (LD) Linear Actuators
Pololu Jrk Motor Controllers with Feedback
Pololu Simple Motor Controllers
Brushed DC Motor Controllers
Brushed DC Motor Drivers
Motors and Gearboxes
RC Servos
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors