Electronics » Motion Control Modules » Stepper Motor Drivers »
DRV8834 Low-Voltage Stepper Motor Driver Carrier (Header Pins Soldered)
This version of our DRV8834 Low-Voltage Stepper Motor Driver Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Please see the DRV8834 Low-Voltage Stepper Motor Driver Carrier product page for more information about the driver.
Alternatives available with variations in these parameter(s): header pins soldered? Select variant…
Compare all products in Stepper Motor Drivers or 16-pin Stepper Motor Drivers.
| Description | Specs (13) | Pictures (8) | Resources (8) | FAQs (4) | On the blog (0) |
|---|
Dimensions
| Size: | 0.6″ × 0.8″ |
|---|---|
| Weight: | 2.5 g |
General specifications
| Minimum operating voltage: | 2.5 V |
|---|---|
| Maximum operating voltage: | 10.8 V |
| Continuous current per phase: | 1.5 A1 |
| Maximum current per phase: | 2 A2 |
| Minimum logic voltage: | 2.5 V3 |
| Maximum logic voltage: | 5.5 V3 |
| Microstep resolutions: | full, 1/2, 1/4, 1/8, 1/16, and 1/32 |
| Reverse voltage protection?: | N |
| Header pins soldered?: | Y |
Identifying markings
| PCB dev codes: | md22a |
|---|---|
| Other PCB markings: | 0J7097 |
Notes:
Related products
Coupon Discount
CW24P2874: Get up to 7 of #2874 DRV8834 Low-Voltage Stepper Motor Driver Carrier (Header Pins Soldered) at $7.22 each. This offer is valid from 03 Dec 2024 to 08 Dec 2024.
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
