12V Motor with 64 CPR Encoder for 37D mm Metal Gearmotors (No Gearbox, Spur Pinion)
This is the motor and encoder portion of our 37D mm metal gearmotors with 64 CPR encoders. It does not include a gearbox, but the pinion gear on the output shaft works with all of our spur pinion 37D mm gearmotor gearboxes, so this can be used as a replacement motor or encoder for those gearboxes. It is intended for use at 12 V, though the motor can begin rotating at voltages as low as 1 V.
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 12 V | 10,000 RPM, 200 mA | 0.5 kg⋅cm (7 oz⋅in), 5.5 A |
Alternatives available with variations in these parameter(s): gear ratio encoders? Select variant…
| Description | Specs (14) | Pictures (5) | Resources (4) | FAQs (0) | On the blog (1) |
|---|
|
Motor with 64 CPR Encoder for 37D mm Metal Gearmotors (No Gearbox, Spur Pinion). |
|---|
 |
37D mm metal gearmotor with 64 CPR encoder (no gearbox). |
|---|
 |
37D mm metal gearmotor with 64 CPR encoder (with end cap removed). |
|---|
 |
The 25D and 37D mm metal gearmotors with encoders have cables that are terminated with a 6-pin, 0.1″-pitch female connector. |
|---|
 |
Encoder A and B outputs for 37D mm metal gearmotor with 64 CPR encoder (12V motor running at 12 V). |
|---|
Related products
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
