Mini Plastic Gearmotors »
180:1 Mini Plastic Gearmotor, Offset 3mm D-Shaft Output
This compact, inexpensive plastic gearmotor (brushed DC motor with a 180:1 reduction gearbox) is well suited for use in small robots. While intended for operation at 4.5 V, it should run comfortably in the 3 V to 6 V range. The gearbox has a 9.7mm-long, 3 mm-diameter D-shaped output shaft that is offset from but parallel to the motor shaft, and a built-in safety clutch helps protect the gears from excessive loads.
voltage | no-load performance | stall extrapolation |
---|---|---|
4.5 V | 80 RPM, 80 mA | 2.2 kg⋅cm (30 oz⋅in), 800 mA |
Alternatives available with variations in these parameter(s): shaft type no-load speed @ 4.5V extended motor shaft? Select variant…
Description | Specs (11) | Pictures (13) | Resources (7) | FAQs (1) | On the blog (1) |
---|
Dimensions
Size: | 36.5 x 20 x 27.4 mm1 |
---|---|
Weight: | 19 g |
Shaft diameter: | 3 mm2 |
General specifications
Shaft type: | offset 3mm D |
---|---|
Typical operating voltage: | 4.5 V |
Gear ratio: | 180:1 |
No-load speed @ 4.5V: | 80 rpm |
No-load current @ 4.5V: | 80 mA |
Stall current @ 4.5V: | 800 mA |
Stall torque @ 4.5V: | 30 oz·in3 |
Extended motor shaft?: | N |