Pololu Simple High-Power Motor Controller 18v25

Pololu item #: 1381
Brand: Pololu supply outlook
Status: End-of-Life Rationing 
RoHS 3 compliant

Price break Unit price (US$)
1 162.95


backorders allowed

The Pololu Simple High-Power Motor Controller makes basic control of brushed DC motors easy, with our free Simple Motor Control Center software enabling quick configuration over USB. The controller supports four interface modes: USB, TTL serial, analog voltage, and hobby radio control (RC). This version operates from 5.5 to 30 V and is efficient enough to deliver a continuous 25 A without a heat sink. It ships with the power capacitor and connectors included but not soldered in, allowing for custom installations.

Alternatives available with variations in these parameter(s): continuous output current per channel partial kit? Select variant…

 Description Specs (11) Pictures (26) Resources (9) FAQs (1) On the blog (0) 

Dimensions

Size: 2.3" x 1.2" x 0.4"
Weight: 12 g1

General specifications

Motor channels: 1
Control interface: USB; non-inverted TTL serial;
RC servo pulses; analog voltage2
Minimum operating voltage: 5.5 V
Maximum operating voltage: 30 V
Continuous output current per channel: 25 A3
Maximum PWM frequency: 21.77 kHz
Maximum logic voltage: 3.3 V4
Reverse voltage protection?: N
Partial kit?: Y

Notes:

1
Without included hardware.
2
Autodetects baud rates between 1200 and 500,000 bps, or can be set to any fixed baud rate in this range.
3
Typical results at room temperature without a heat sink.
4
All digital inputs are 5V tolerant.

Related Products

High-Power Simple Motor Controller G2 18v15 (Connectors Soldered)
High-Power Simple Motor Controller G2 18v15
High-Power Simple Motor Controller G2 24v12 (Connectors Soldered)
High-Power Simple Motor Controller G2 24v12
High-Power Simple Motor Controller G2 18v25
High-Power Simple Motor Controller G2 24v19
USB Cable A to Mini-B, 5 ft
Thin (2mm) USB Cable A to Mini-B, 5 ft., Low/Full-Speed Only
Pololu Simple High-Power Motor Controller 18v15 (Fully Assembled)
Pololu Simple High-Power Motor Controller 18v15
Pololu Simple High-Power Motor Controller 24v12 (Fully Assembled)
Pololu Simple High-Power Motor Controller 24v12
Pololu Simple High-Power Motor Controller 24v23
Pololu G2 High-Power Motor Driver 18v17
Pololu G2 High-Power Motor Driver 24v13
Pololu G2 High-Power Motor Driver 18v25
Pololu G2 High-Power Motor Driver 24v21
Twisted Servo Y Splitter Cable 12" Female - 2x Female
T Connector Male-Female Pair
XT60 Connector Male-Female Pair, Black
XT60 Connector Male-Female Pair, Yellow
Tamiya Plug with 10cm Leads, Female
Tamiya Plug with 10cm Leads, Male
Screw Terminal Block: 2-Pin, 5 mm Pitch, Side Entry (4-Pack)
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
0.100" (2.54 mm) Shorting Block: Blue, Top Closed
50:1 Metal Gearmotor 37Dx70L mm 12V with 64 CPR Encoder (Spur Pinion)
75:1 Metal Gearmotor 25Dx54L mm HP 6V

Related Categories

Pololu Simple Motor Controllers
Pololu High-Power Motor Drivers
Motors and Gearboxes
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Wild Thumper All-Terrain Chassis
Pololu Jrk Motor Controllers with Feedback
Pololu Qik Dual Serial Motor Controllers
Brushed DC Motor Drivers
RC Interface
Development Boards (Programmable Controllers)
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors