The Motoron M2S family of dual high-power motor controller shields makes it easy to control powerful DC motors from an Arduino-compatible board using I²C. Each stackable module can independently control up to two motors with currents up to 20 A per channel.

The Motoron M3S256 triple motor controller makes it easy to control DC motors from an Arduino-compatible board using I²C. Each stackable module supports motor supply voltages from 4.5 V to 48 V and can independently control up to three motors with continuous output currents up to 2 A per channel.

The Motoron M3S550 triple motor controller makes it easy to control DC motors from an Arduino-compatible board using I²C. Each stackable module supports motor supply voltages from 1.8 V to 22 V and can independently control up to three motors with continuous output currents up to 1.7 A per channel.

The Motoron M2H family of dual high-power motor controllers makes it easy to control powerful DC motors from a Raspberry Pi through an I²C interface. Each stackable module can independently control up to two motors with currents up to 20 A per channel.

The Motoron M3H256 triple motor controller makes it easy to control DC motors from a Raspberry Pi using I²C. Each stackable module supports motor supply voltages from 4.5 V to 48 V and can independently control up to three motors with continuous output currents up to 2 A per channel.

The Motoron M3H550 triple motor controller makes it easy to control DC motors from a Raspberry Pi using I²C. Each stackable module supports motor supply voltages from 1.8 V to 22 V and can independently control up to three motors with continuous output currents up to 1.7 A per channel.

The tiny Motoron M2T256 and M2U256 dual motor controllers make it easy to control DC motors using I²C or TTL serial. They support motor supply voltages from 4.5 V to 48 V and can independently control up to two motors with continuous output currents up to 1.8 A per channel.

The tiny Motoron M2T550 and M2U550 dual motor controllers make it easy to control DC motors using I²C or TTL serial. They support motor supply voltages from 1.8 V to 22 V and can independently control up to two motors with continuous output currents up to 1.6 A per channel.

The tiny Motoron M1T256 and M1U256 dual motor controllers make it easy to control DC motors using I²C or TTL serial. They support motor supply voltages from 4.5 V to 48 V and can control a single motor with continuous output currents up to 2.2 A.

The tiny Motoron M1T55 and M1U55 dual motor controllers make it easy to control DC motors using I²C or TTL serial. They support motor supply voltages from 1.8 V to 22 V and can control a single motor with continuous output currents up to 1.8 A.