Motion Control Modules » Brushed DC Motor Controllers » Motoron Motor Controllers »
Motoron M2H Dual High-Power Motor Controllers for Raspberry Pi
The Motoron M2H family of dual high-power motor controller add-on boards makes it easy to control up two bidirectional, brushed DC motors with a compatible Raspberry Pi (Model B+ or newer). The M2H controllers are designed to stack on top of a Raspberry Pi (Model B+ or newer), similar to a HAT (Hardware Attached on Top), and multiple controllers can be stacked on top of each other, allowing independent control of many motors. Unlike most of our motor drivers and motor driver expansion boards for Raspberry Pi, the Motoron does not require any PWM outputs on your Raspberry Pi. Instead, the Raspberry Pi communicates with the Motoron using I²C, so only two GPIO pins are needed regardless of how many Motorons you connect. Four types are available so you can pick the one with the appropriate operating voltage range and output current capabilities for your project:
 Motoron M2H18v20 Dual High-Power Motor Controller for Raspberry Pi |
 Motoron M2H18v18 Dual High-Power Motor Controller for Raspberry Pi |
 Motoron M2H24v16 Dual High-Power Motor Controller for Raspberry Pi |
 Motoron M2H24v14 Dual High-Power Motor Controller for Raspberry Pi |
|
|---|---|---|---|---|
| Absolute max motor supply voltage: |
30 V | 40 V | ||
| Recommended max nominal battery voltage: |
18 V | 28 V | ||
| Max continuous current per channel: |
20 A | 18 A | 16 A | 14 A |
| Available versions: | ||||
Each of the four types above is available in three versions to provide different options for the through-hole connectors: they can be purchased as an assembled product with stackable headers and terminal blocks soldered in, as a kit with connectors included but not soldered in, or as a standalone board without connectors.
Compare all products in this category
Products in category “Motoron M2H Dual High-Power Motor Controllers for Raspberry Pi”
| Pololu item #: 5048 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
The Motoron M2H18v18 Dual High-Power Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. The M2H18v18 supports motor supply voltages from 6.5 V to 30 V and can deliver continuous output currents up to 18 A per motor. This version ships with aluminum standoffs and with soldered stackable headers and terminal blocks.
| Pololu item #: 5049 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
The Motoron M2H18v18 Dual High-Power Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. The M2H18v18 supports motor supply voltages from 6.5 V to 30 V and can deliver continuous output currents up to 18 A per motor. This version ships with aluminum standoffs, header pins, and terminal block options included but not soldered in.
| Pololu item #: 5050 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
The Motoron M2H18v18 Dual High-Power Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. The M2H18v18 supports motor supply voltages from 6.5 V to 30 V and can deliver continuous output currents up to 18 A per motor. This version is just the motor controller by itself, without any connectors or mounting hardware included.
| Pololu item #: 5051 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
The Motoron M2H24v14 Dual High-Power Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. The M2H24v14 supports motor supply voltages from 6.5 V to 40 V and can deliver continuous output currents up to 14 A per motor. This version ships with aluminum standoffs and with soldered stackable headers and terminal blocks.
| Pololu item #: 5052 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
The Motoron M2H24v14 Dual High-Power Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. The M2H24v14 supports motor supply voltages from 6.5 V to 40 V and can deliver continuous output currents up to 14 A per motor. This version ships with aluminum standoffs, header pins, and terminal block options included but not soldered in.
| Pololu item #: 5053 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
The Motoron M2H24v14 Dual High-Power Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. The M2H24v14 supports motor supply voltages from 6.5 V to 40 V and can deliver continuous output currents up to 14 A per motor. This version is just the motor controller by itself, without any connectors or mounting hardware included.
| Pololu item #: 5054 | |
| Brand: Pololu | supply outlook |
| Status: Rationed (Active and Preferred) | |
|
|
|
The Motoron M2H18v20 Dual High-Power Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. The M2H18v20 supports motor supply voltages from 6.5 V to 30 V and can deliver continuous output currents up to 20 A per motor. This version ships with aluminum standoffs and with soldered stackable headers and terminal blocks.
| Pololu item #: 5055 | |
| Brand: Pololu | supply outlook |
| Status: Rationed (Active and Preferred) | |
|
|
|
The Motoron M2H18v20 Dual High-Power Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. The M2H18v20 supports motor supply voltages from 6.5 V to 30 V and can deliver continuous output currents up to 20 A per motor. This version ships with aluminum standoffs, header pins, and terminal block options included but not soldered in.
| Pololu item #: 5056 | |
| Brand: Pololu | supply outlook |
| Status: Rationed (Active and Preferred) | |
|
|
|
The Motoron M2H18v20 Dual High-Power Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. The M2H18v20 supports motor supply voltages from 6.5 V to 30 V and can deliver continuous output currents up to 20 A per motor. This version is just the motor controller by itself, without any connectors or mounting hardware included.
| Pololu item #: 5057 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
The Motoron M2H24v16 Dual High-Power Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. The M2H24v16 supports motor supply voltages from 6.5 V to 40 V and can deliver continuous output currents up to 16 A per motor. This version ships with aluminum standoffs and with soldered stackable headers and terminal blocks.
| Pololu item #: 5058 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
The Motoron M2H24v16 Dual High-Power Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. The M2H24v16 supports motor supply voltages es from 6.5 V to 40 V and can deliver continuous output currents up to 16 A per motor. This version ships with aluminum standoffs, header pins, and terminal block options included but not soldered in.
| Pololu item #: 5059 | |
| Brand: Pololu | supply outlook |
| Status: Rationed (Active and Preferred) | |
|
|
|
The Motoron M2H24v16 Dual High-Power Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. The M2H24v16 supports motor supply voltages from 6.5 V to 40 V and can deliver continuous output currents up to 16 A per motor. This version is just the motor controller by itself, without any connectors or mounting hardware included.
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
