Chris Eckert makes devices that explore the artistic potential of factory automation. One of his works, entitled ToDo, is an automated wall mounted device that seems to continuously write a never-ending list of things to do. Two stepper motors control the position of a pen over a roll a paper, and a servo controls the pen’s up/down movement. The device is controlled by an Arduino Uno and two of our A4988 stepper motor drivers. You can find more details about the construction in Chris’s blog posts about Todo and see more of Todo on its gallery page.

Chris is currently working on another project called Babel, which will feature about 20 devices similar to ToDo.

You can learn more about Chris and his artwork on his personal website.

Related products

	Arduino Uno R3
	A4988 Stepper Motor Driver Carrier

Several people here at Pololu made robots to compete in the LVBots dead reckoning competition last week. This post is about the robot I made along with another engineer here.

Dead reckoning is the process of continuously calculating your position using internal sensors that tell you something about what speed and direction you are going. In our dead reckoning competitions, robots demonstrate that they are capable of dead reckoning by following a long, twisting line drawn on the floor and then driving back to their starting point. The line functions as a user interface that directs the robots through a sequence of moves for which it was not preprogrammed. The robots are scored based on the time they took and how close they were to the starting point at the end. Continued…

We are excited to welcome several new distributors that have joined Pololu over the past few months!

To start with, we have gained two new distributors in the United States. We have been following Adafruit Industries (New York, NY) for a long time – I remember receiving a SpokePOV kit as a birthday present back in 2007 – so we are particularly excited that they will now be selling some of our products. They are starting with the Zumo, which they featured in a recent new product video. We will also be distributing some of their products, such as the Adafruit Data Logging Shield for Arduino. Is there anything from Adafruit that you would like to see at Pololu? Please let us know in the comment section.

Anibit Technology (Cary, NC) is another new US distributor, founded in 2013 by engineer Jon Wolfe, who is marketing his own designs along with parts from Pololu and Adafruit. We are looking forward to seeing what else he will create!

Next, MiniRobot (Azcapotzalco, Mexico City, Mexico), joins a number of other Mexican distributors. They carry a large selection of parts, including many Pololu items, as well as Arduinos, components, and prototyping supplies.

Continuing south, we have a new distributor in Viña del Mar, Chile: Zambeca. In addition to carrying a number of Arduino, Lilypad, and robotics-related products, they have been posting some interesting-looking project videos on their blog (in Spanish). We have one other distributor in Chile, MCI Ltd – Olimex Chile, who has been with us since 2009.

We now have a distributor in China, ALSRobotBase, located in Harbin, Heilongjiang province. They have a whole “Pololu” category and are also offering to help customers in China with special orders.

Finally, Pimoroni in Sheffield, United Kingdom, is a new distributor specializing in accessories for the Raspberry Pi. They join a number of other UK distributors.

For distributors in your area, you can check out our complete list of almost 200 distributors.

Related products

Adafruit Data Logging Shield for Arduino

Get a FREE copy of Elektor magazine’s March issue with your order while supplies last. To get your free issue, enter the coupon code ELEKTOR0314 into your shopping cart. The magazine will add 6 ounces to the package weight when calculating your shipping options.

For other issues and more information, see our Free Elektor Magazine Offers page. All issues are now available for shipping worldwide!

Related products

Free Elektor magazine March 2014

Forum user solderspot recently posted on our forum about some modifications he’s been making to his Zumo robot. First, he added our optical encoders for micro metal gearmotors to his robot, which required using motors with extended back shafts and cutting holes in the chassis to route the wires from the encoders.

This allows his Zumo to navigate by dead reckoning, using just the information from the encoders.

He also mounted a sonar sensor on a servo to his robot, which enables it to find its way around a room by following the walls.

A series of articles on solderspot’s blog, starting with this one, covers his experience building and programming his robot. It looks like solderspot has further plans for the Zumo, including more sophisticated autonomous navigation, so watch his blog if you want to keep up with the latest developments.

Related products

	Zumo Robot Kit for Arduino (No Motors)
	Optical Encoder Pair Kit for Micro Metal Gearmotors, 5V
	100:1 Micro Metal Gearmotor HP 6V with Extended Motor Shaft

We have new gyros fresh out of the oven. No, I’m not talking about a Greek dish. I’m talking about our new L3GD20H 3-axis gyro carrier.

One of the most important measures of a rate gyroscope’s performance is the amount of noise in its output, which is indicated by its noise density specification. Too much noise means that the gyro will be prone to spurious indications of rotation, and if the gyro readings are integrated to track orientation, noise will cause the calculation to drift over time.

Although sensor fusion can help compensate for this drift by combining the gyro data with an absolute reference (like magnetometer data), using a lower-noise gyro is likely to be a more effective way to improve orientation tracking accuracy. In that respect, one of the biggest improvements of the L3GD20H over its predecessor is that it has a 60% lower rate noise density (0.011 dps/√Hz compared to 0.03 dps/√Hz on the L3GD20).

In addition to accuracy and stability improvements, the L3GD20H offers other advantages. Its power consumption is lower and its start-up time is much shorter. A wider range of user-selectable output data rates is available, including lower frequencies that are appropriate for human gesture detection, and a data enable (DEN) pin allows readings to be synchronized with external triggers. The L3GD20H makes all of these features available in a smaller package than previous gyros, which has allowed us to design a correspondingly smaller carrier board for it while still keeping it breadboard-friendly. For more information, see the L3GD20H carrier product page.

If you don’t need the latest and greatest, the L3GD20 is still a nice sensor, and it’s a good time to grab one now that we’ve lowered the price of our L3GD20 carrier to only $14.95 until stock runs out.

Related products

	L3GD20 3-Axis Gyro Carrier with Voltage Regulator
	L3GD20H 3-Axis Gyro Carrier with Voltage Regulator

Local indie artist and Pololu employee Tracey, intent on reviving her programming skills and exploring her budding interest in electronics, shed some light on her creative personality by making an LED banner for her band, Hope’s Edge. The banner is a briefcase-sized container that uses an addressable LED strip to shine through a stencil of the band’s logo in a wave of brilliantly changing colors. The stencil and the rest of the panels in the container are made from 1/16" black ABS, all of which were cut with our custom laser cutting service, and a sheet of gift-wrap tissue paper is taped to the inside of the front panel to act as a diffuser. The banner runs off of a 5V wall wart, which is boosted to 9V to power an Arduino Uno that runs Ben’s Christmas light LED code.

Related products

	Custom Laser Cutting Service
	Addressable RGB 60-LED Strip, 5V, 2m (WS2812B)

We are now carrying the latest version of SparkFun’s Inventor’s Kit (V3.1), which adds a mini screwdriver and replaces the translucent red breadboard from version 3 with an opaque white one that is easier to read. Version 3.1 includes everything else that was part of the previous version, such as the Arduino-compatible RedBoard and all of the additional components needed to build the 15 basic electronic circuits detailed in the guide.

For more information see the SparkFun Inventor’s Kit – V3.1 (with Arduino-Compatible RedBoard) product page.

Related products

SparkFun Inventor's Kit - V3.1 (with Arduino-Compatible RedBoard)

When we designed the first version of the Pololu USB-to-serial adapter way back in 2004, using a USB Mini-B receptacle was an obvious choice: it was much smaller than the standard B-type connector, allowing us to keep the board compact, and it was readily available in surface-mount configurations that facilitate automated printed circuit board assembly.

We went on to use the Mini-B connector in lots of products, like our Maestro servo controllers and Wixel. Although the even smaller Micro-B connector became part of the USB specification in 2007, it didn’t seem to offer enough of an advantage over the Mini-B connector for us to immediately switch over. Continued…

Do you want to build your own weather monitoring station? This weather shield from SparkFun might be what you are looking for. In the form of an Arduino shield, this easy-to-use weather board can measure relative humidity, temperature, barometric pressure, and luminosity.

For more information, see the SparkFun Weather Shield for Arduino product page.

Related products

SparkFun Weather Shield for Arduino