BCM 60:1 Gear Motor Offset Output

This 60:1 gearmotor (gearbox with motor) is a great low-cost alternative to modified hobby servos or Tamiya gearboxes, and a higher-speed alternative to Pololu plastic gearboxes and Solarbotics gearboxes. This gearmotor comes pre-assembled, with the gears fully enclosed. There are built-in mounting holes that are compatible with the Solarbotics GMB28 mounting bracket, and the output shaft is 5.3 mm in diameter with two sides flattened to a thickness of 3.6 mm. Note that this is smaller than output shafts on the the offset-output Solarbotics gear motors, so Solarbotics wheels are not compatible with these gearmotors.

The BCM wheel is designed to work with this gearmotor.

Note: This gearmotor does not come with mounting hardware, instructions, or packaging.

Specifications at 6 V

• Description: Offset/inline
• Gear ratio: 60:1
• No-load RPM: ~ 180
• No-load current: ~ 160 mA
• Stall current: ~ 2.6 A
• Stall torque: ~ 11 oz-in (0.8 kg-cm)
• L x W x H: 55 mm x 48 mm x 23 mm