CT433-HSWF50DR TMR Current Sensor Compact Carrier 0A to 50A, 3.3V

Pololu item #: 5318
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant

Price break Unit price (US$)
1 9.95
5 9.15
25 8.42
100 7.75


backorders allowed

This is the compact version of a simple carrier for Allegro’s CT433-HSWF50DR TMR-based, electrically isolated current sensor that is optimized for high dV/dt applications and offers a high 1 MHz bandwidth with low noise. The typical primary current path resistance of the sensor IC is 1 mΩ.

Part Prefix Part Suffix Range Supply Voltage Sensitivity Zero Point Size PCB layers
CT433 50DR 0-50 A (unidirectional) 3.0 V to 3.6 V 40 mV/A 0.65 V 0.8″×1.1″ 4

Alternatives available with variations in these parameter(s): current range size Select variant…

 Description Specs (11) Pictures (13) Resources (7) FAQs (0) On the blog (0) Distributors (2) 

CT433-HSWF50DR TMR Current Sensor Compact Carrier 0A to 50A, 3.3V.

CT433-HSWF50DR TMR Current Sensor Compact Carrier 0A to 50A, 3.3V, top view.

Bottom view of the CT432/CT433 TMR Current Sensor Compact Carrier, 4-layer PCB (cs07b).

CT432/CT433 TMR Current Sensor Compact Carrier pinout.

CT432/CT433 TMR Current Sensor Compact Carrier basic hole dimensions.

CT432/CT433 TMR Current Sensor Compact Carrier (top) and Large Carrier (bottom) size comparison.

CT432/CT433 TMR Current Sensor Carrier schematic diagram.

CT432/CT433 TMR Current Sensor Compact Carrier with wires connected via solderless ring terminals.

CT432/CT433 TMR Current Sensor Compact Carrier with wires connected via solderless ring terminals.

CT432/CT433 TMR Current Sensor Compact Carrier with wires soldered directly to the board.

CT432/CT433 TMR Current Sensor Compact Carrier with wires soldered directly to the board.

CT432/CT433 TMR Current Sensor Compact Carrier with a 5mm-pitch terminal block for the current path and header pins soldered for use with a breadboard.

CT432/CT433 TMR Current Sensor Compact Carrier with a 5mm-pitch terminal block for the current path and header pins soldered for use with a breadboard.


Related Products

0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Right Angle
0.100" (2.54 mm) Female Header: 1x5-Pin, Straight
0.1" (2.54mm) Crimp Connector Housing: 1x5-Pin 10-Pack
T Connector Male-Female Pair

Related Categories

CT432/CT433 TMR Current Sensor Compact Carriers
CT432/CT433 TMR Current Sensor Large Carriers
Terminal Blocks
Premium Jumper Wires
Wires with Pre-Crimped Terminals
0.1″ (2.54 mm) Male Headers
Electronics Prototyping
Motion Control Modules
Motors and Gearboxes
RC Servos
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors