Current Sensors » CT432/CT433 TMR Current Sensor Carriers » CT432/CT433 TMR Current Sensor Compact Carriers »
CT433-HSWF20MR TMR Current Sensor Compact Carrier -20A to +20A, 3.3V
This is the compact version of a simple carrier for Allegro’s CT433-HSWF20MR TMR-based, electrically isolated current sensor that is optimized for high dV/dt applications and offers a high 1 MHz bandwidth with low noise. The typical primary current path resistance of the sensor IC is 1 mΩ.
| Part Prefix | Part Suffix | Range | Supply Voltage | Sensitivity | Zero Point | Size | PCB layers |
|---|---|---|---|---|---|---|---|
| CT433 | 20MR | ±20 A (bidirectional) | 3.0 V to 3.6 V | 50 mV/A | 1.65 V | 0.8″×1.1″ | 2 |
Alternatives available with variations in these parameter(s): current range size Select variant…
Compare all products in CT432/CT433 TMR Current Sensor Compact Carriers.
| Description | Specs (11) | Pictures (13) | Resources (7) | FAQs (0) | On the blog (0) |
|---|
|
CT433-HSWF20MR TMR Current Sensor Compact Carrier -20A to +20A, 3.3V. |
|---|
 |
CT433-HSWF20MR TMR Current Sensor Compact Carrier -20A to +20A, 3.3V, top view. |
|---|
 |
Bottom view of the CT432/CT433 TMR Current Sensor Compact Carrier, 2-layer PCB (cs07a). |
|---|
 |
CT432/CT433 TMR Current Sensor Compact Carrier pinout. |
|---|
 |
CT432/CT433 TMR Current Sensor Compact Carrier basic hole dimensions. |
|---|
 |
CT432/CT433 TMR Current Sensor Compact Carrier (top) and Large Carrier (bottom) size comparison. |
|---|
 |
CT432/CT433 TMR Current Sensor Carrier schematic diagram. |
|---|
 |
CT432/CT433 TMR Current Sensor Compact Carrier with wires connected via solderless ring terminals. |
|---|
 |
CT432/CT433 TMR Current Sensor Compact Carrier with wires connected via solderless ring terminals. |
|---|
 |
CT432/CT433 TMR Current Sensor Compact Carrier with wires soldered directly to the board. |
|---|
 |
CT432/CT433 TMR Current Sensor Compact Carrier with wires soldered directly to the board. |
|---|
 |
CT432/CT433 TMR Current Sensor Compact Carrier with a 5mm-pitch terminal block for the current path and header pins soldered for use with a breadboard. |
|---|
 |
CT432/CT433 TMR Current Sensor Compact Carrier with a 5mm-pitch terminal block for the current path and header pins soldered for use with a breadboard. |
|---|
Related products
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
