Brushed DC Motor Controllers » Motoron Motor Controllers » Motoron M3H550 Triple Motor Controller for Raspberry Pi »
Motoron M3H550 Triple Motor Controller for Raspberry Pi (No Connectors or Standoffs)
The Motoron M3H550 Triple Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. Each module can independently control up to three motors, and multiple Motoron boards can be stacked on top of the same Raspberry Pi for projects that need to control even more motors. The M3H550 supports motor supply voltages from 1.8 V to 22 V and can deliver continuous output currents up to 1.7 A per motor. This version is just the motor controller by itself, without any connectors or mounting hardware included.
Compare all products in Motoron M3H550 Triple Motor Controller for Raspberry Pi.
| Description | Specs (15) | Pictures (11) | Resources (5) | FAQs (0) | On the blog (1) | Distributors (12) |
|---|
Dimensions
| Size: | 32.5 mm × 56 mm |
|---|---|
| Weight: | 8 g |
General specifications
| Channels: | 3 |
|---|---|
| Model: | Motoron M3H550 |
| Control interface: | I²C |
| Minimum operating voltage: | 1.8 V |
| Maximum operating voltage: | 22 V |
| Continuous output current per channel: | 1.7 A |
| Peak output current per channel: | 5 A |
| Minimum logic voltage: | 3.0 V |
| Maximum logic voltage: | 4.9 V1 |
| Reverse voltage protection?: | Y2 |
| Connectors soldered?: | N |
Identifying markings
| PCB dev codes: | mc3h44a |
|---|---|
| Other PCB markings: | 0J13969 |
Notes:
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
