Brushed DC Motor Controllers » Motoron Motor Controllers » Motoron M2H Dual High-Power Motor Controllers for Raspberry Pi »
Motoron M2H18v20 Dual High-Power Motor Controller for Raspberry Pi (No Connectors or Standoffs)
The Motoron M2H18v20 Dual High-Power Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. The M2H18v20 supports motor supply voltages from 6.5 V to 30 V and can deliver continuous output currents up to 20 A per motor. This version is just the motor controller by itself, without any connectors or mounting hardware included.
Compare all products in Motoron M2H Dual High-Power Motor Controllers for Raspberry Pi.
| Description | Specs (14) | Pictures (10) | Resources (5) | FAQs (0) | On the blog (0) |
|---|
|
Motoron M2H18v20 Dual High-Power Motor Controller for Raspberry Pi (No Connectors or Standoffs). |
|---|
 |
Motoron M2H18v20 Dual High-Power Motor Controller for Raspberry Pi, top view. |
|---|
 |
Motoron M2H18v20 or M2H24v16 Dual High-Power Motor Controller for Raspberry Pi, bottom view with dimensions. |
|---|
 |
A Motoron M2H dual motor controller being controlled by a Raspberry Pi. |
|---|
 |
A Motoron M2H and a Motoron M3H256 being controlled by a Raspberry Pi, allowing for independent control of five motors. |
|---|
 |
Two Motoron M2H boards with terminal blocks can be stacked if you trim the leads on the terminal blocks and space out each board using hex nuts in addition to the 11mm standoffs. |
|---|
 |
Two Motoron M2H shields stacked on a Raspberry Pi. |
|---|
 |
A Raspberry Pi using a Motoron M2H dual high-power motor controller to control a pair of high-power motors. |
|---|
 |
Using the Motoron M2H Dual High-Power Motor Controller with a Raspberry Pi. |
|---|
 |
Motoron M2H Dual High-Power Motor Controller for Raspberry Pi pinout. |
|---|
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
