Brushed DC Motor Controllers » Motoron Motor Controllers » Motoron M2H Dual High-Power Motor Controllers for Raspberry Pi »
Motoron M2H18v20 Dual High-Power Motor Controller for Raspberry Pi (Connectors Soldered)
The Motoron M2H18v20 Dual High-Power Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. The M2H18v20 supports motor supply voltages from 6.5 V to 30 V and can deliver continuous output currents up to 20 A per motor. This version ships with aluminum standoffs and with soldered stackable headers and terminal blocks.
Compare all products in Motoron M2H Dual High-Power Motor Controllers for Raspberry Pi.
| Description | Specs (14) | Pictures (12) | Resources (5) | FAQs (0) | On the blog (1) | Distributors (25) |
|---|
Dimensions
| Size: | 65 mm × 56 mm |
|---|---|
| Weight: | 29 g1 |
General specifications
| Channels: | 2 |
|---|---|
| Model: | Motoron M2H18v20 |
| Control interface: | I²C |
| Minimum operating voltage: | 6.5 V |
| Maximum operating voltage: | 30 V2 |
| Continuous output current per channel: | 20 A3 |
| Minimum logic voltage: | 3.0 V |
| Maximum logic voltage: | 5.5 V |
| Reverse voltage protection?: | Y |
| Connectors soldered?: | Y |
Identifying markings
| PCB dev codes: | mc2h31b |
|---|---|
| Other PCB markings: | 0J13644 |
Notes:
- 1
- Not including standoffs.
- 2
- Absolute maximum; higher voltages can permanently destroy the motor drivers. Recommended maximum is approximately 24 V, which leaves a safety margin for ripple voltage on the supply line. Not recommended for use with 24V batteries.
- 3
- Typical results at room temperature with both channels running at 90% duty cycle.
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
