Brushed DC Motor Controllers » Motoron Motor Controllers » Motoron M2S Dual High-Power Motor Controllers for Arduino »
Motoron M2S18v20 Dual High-Power Motor Controller Shield for Arduino (No Connectors)
The Motoron M2S18v20 Dual High-Power Motor Controller Shield for Arduino makes it easy to control two high-power DC motors from an Arduino or Arduino-compatible board through an I²C interface. The M2S18v20 supports motor supply voltages from 6.5 V to 30 V and can deliver continuous output currents up to 20 A per motor. This version is just the motor controller by itself, without any header pins or terminal blocks included.
Compare all products in Motoron M2S Dual High-Power Motor Controllers for Arduino.
| Description | Specs (14) | Pictures (9) | Resources (5) | FAQs (0) | On the blog (0) |
|---|
|
Motoron M2S18v20 Dual High-Power Motor Controller Shield for Arduino (No Connectors). |
|---|
 |
Motoron M2S18v20 Dual High-Power Motor Controller Shield for Arduino, top view. |
|---|
 |
Motoron M2S18v20 or M2S24v16 Dual High-Power Motor Controller Shield for Arduino, bottom view with dimensions. |
|---|
 |
Motoron M2S shield being controlled by an Arduino Leonardo. |
|---|
 |
Three Motoron M2S dual high-power motor controller shields being controlled by an Arduino Leonardo. |
|---|
 |
An Arduino Leonardo using a Motoron M2S Dual High-Power Motor Controller Shield to control a pair of high-power motors. |
|---|
 |
A Raspberry Pi Pico on a breadboard using a Motoron M2S shield to control motors. A voltage regulator soldered to the Motoron powers the Pico. |
|---|
 |
Using a Motoron M2S Dual High-Power Motor Controller Shield with an Arduino. |
|---|
 |
Motoron M2S Dual High-Power Motor Controller Shield pinout. |
|---|
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
