Brushed DC Motor Controllers » Motoron Motor Controllers » Motoron M3H256 Triple Motor Controller for Raspberry Pi »
Motoron M3H256 Triple Motor Controller Kit for Raspberry Pi
The Motoron M3H256 Triple Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. Each module can independently control up to three motors, and multiple Motoron boards can be stacked on top of the same Raspberry Pi for projects that need to control even more motors. The M3H256 supports motor supply voltages from 4.5 V to 48 V and can deliver continuous output currents up to 2 A per motor. This version ships with a variety of header pin and terminal block options included but not soldered in.
Compare all products in Motoron M3H256 Triple Motor Controller for Raspberry Pi.
Description | Specs (15) | Pictures (13) | Resources (5) | FAQs (0) | On the blog (1) | Distributors (25) |
---|
Dimensions
Size: | 32.5 mm × 56 mm |
---|---|
Weight: | 8.5 g1 |
General specifications
Channels: | 3 |
---|---|
Model: | Motoron M3H256 |
Control interface: | I²C |
Minimum operating voltage: | 4.5 V |
Maximum operating voltage: | 48 V2 |
Continuous output current per channel: | 2 A |
Peak output current per channel: | 6.4 A |
Minimum logic voltage: | 3.0 V |
Maximum logic voltage: | 5.5 V |
Reverse voltage protection?: | Y3 |
Connectors soldered?: | N |
Identifying markings
PCB dev codes: | mc3h42a |
---|---|
Other PCB markings: | 0J13654 |
Notes:
- 1
- PCB assembly only, without optional included headers, terminal blocks, or standoffs.
- 2
- Absolute maximum; higher voltages can permanently destroy the motor drivers. Recommended maximum nominal battery voltage is approximately 36 V, which leaves a safety margin for ripple voltage on the supply line.
- 3
- Note: Reverse voltage protection only works up to 40 V.