5V Step-Up/Step-Down Voltage Regulator S8V9F5

Pololu item #: 4965
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant

Price break Unit price (US$)
1 7.49
5 6.89
25 6.34
100 5.83


backorders allowed

Output
voltage
Typical max
current output*
Input voltage range Size
5 V 1.5 A 1.4 V – 16 V
(2.7 V startup)
0.4″ × 0.65″

*For input voltages close to the output. Actual achievable maximum continuous current is a function of input and output voltage and is limited by thermal dissipation. See the output current graphs on the product page for more information.

Alternatives available with variations in these parameter(s): output voltage Select variant…

 Description Specs (11) Pictures (13) Resources (3) FAQs (0) On the blog (0) 

Dimensions

Size: 0.4″ × 0.65″ × 0.1"1
Weight: 0.8 g1

General specifications

Minimum operating voltage: 1.4 V2
Maximum operating voltage: 16 V
Continuous output current: 1.2 A3
Output voltage: 5 V
Reverse voltage protection?: N
Maximum quiescent current: 4 mA4
Output type: fixed 5V

Identifying markings

PCB dev codes: reg31a
Other PCB markings: 0J14112

Notes:

1
Without included optional headers.
2
Note: the minimum startup voltage is 2.7V, but the regulator can operate down to 1.4V after startup.
3
Under typical conditions, where the input voltage is close to the output voltage. Actual achievable continuous output current is a function of input voltage and is limited by thermal dissipation. See the output current graph under the description tab for more information.
4
While enabled with no load. See the quiescent current graph under the description tab for more information. Can be reduced to less than 15 µA per volt on VIN using the enable pin.

Related Products

3.3V Step-Up/Step-Down Voltage Regulator S8V9F3
6V Step-Up/Step-Down Voltage Regulator S8V9F6
7.5V Step-Up/Step-Down Voltage Regulator S8V9F7
9V Step-Up/Step-Down Voltage Regulator S8V9F9
0.100" (2.54 mm) Female Header: 1x4-Pin, Straight
0.1" (2.54mm) Crimp Connector Housing: 1x4-Pin 10-Pack
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Right Angle

Related Categories

S8V9Fx Step-Up/Step-Down Voltage Regulators
Step-Up/Step-Down Voltage Regulators
Voltage Regulators and Power Supplies
S9V11x Step-Up/Step-Down Voltage Regulators
S13VxFx Step-Up/Step-Down Voltage Regulators
Battery Holders
Batteries
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Solderless Breadboards
Electronics Prototyping
0.1″ (2.54 mm) Male Headers
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors