LP 12V Motor with 48 CPR Encoder for 25D mm Metal Gearmotors (No Gearbox)

Pololu item #: 4880
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant

Price break Unit price (US$)
1 28.49
5 26.21
25 24.11
100 22.18


backorders allowed

This is the motor and encoder portion of our low-power (LP), 12V 25D mm metal gearmotors with 48 CPR encoders. It does not include a gearbox, but the pinion gear on the output shaft works with all of our 25D mm gearmotor gearboxes, so this can be used as a replacement motor or encoder for those gearboxes.

Key specifications:

voltage no-load performance stall extrapolation
12 V 5600 RPM, 60 mA 0.14 kg⋅cm (1.9 oz⋅in), 0.9 A

You can use the following selection boxes to choose from all of our 25D metal gearmotor versions:

Alternatives available with variations in these parameter(s): gear ratio motor type encoders? Select variant…

 Description Specs (13) Pictures (5) Resources (3) FAQs (2) On the blog (0) 

Dimensions

Size: 25D x 46L mm1
Weight: 60 g

General specifications

Gear ratio: 1:12
No-load speed @ 12V: 5600 rpm3
No-load current @ 12V: 0.060 A4
Stall current @ 12V: 0.90 A5
Stall torque @ 12V: 0.14 kg·cm5
No-load speed @ 6V: 2800 rpm
Stall current @ 6V: 0.45 A
Stall torque @ 6V: 0.070 kg·cm
Motor type: 12V, 0.9A stall (LP 12V)
Lead length: 8 in6
Encoders?: Y

Notes:

1
Length does not include the motor shaft. See dimension diagram for details.
2
This motor does not have a gearbox.
3
Typical; ±20%.
4
Typical, ±50%; no-load current depends on internal friction, which is affected by many factors, including ambient temperature and duration of motor operation.
5
Stalling is likely to damage the motor. Stall parameters come from a theoretical extrapolation of performance at loads far from stall. As the motor heats up, as happens as it approaches an actual stall, the stall torque and current decrease.
6
May vary by a few inches.

Related Products

TB9051FTG Single Brushed DC Motor Driver Carrier
Dual TB9051FTG Motor Driver Shield for Arduino
High-Power Simple Motor Controller G2 24v12 (Connectors Soldered)
Jrk G2 21v3 USB Motor Controller with Feedback
Pololu Qik 2s15v9 Dual Serial Motor Controller
Female Crimp Pins for 0.1" Housings 100-Pack
Male Crimp Pins for 0.1" Housings 100-Pack
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black

Related Categories

12V Low-Power (LP) 25D mm Gearmotors
25D Metal Gearmotors
Brushed DC Motor Controllers
Brushed DC Motor Drivers
Robot Controllers
Current Sensors
37D Metal Gearmotors
Micro Metal Gearmotors
Wild Thumper All-Terrain Chassis
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Crimp Connector Housings
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors