Pololu Metal Gearmotors » 25D Metal Gearmotors » 6V High-Power (HP) 25D mm Gearmotors »
47:1 Metal Gearmotor 25Dx67L mm HP 6V with 48 CPR Encoder
This gearmotor consists of a high-power, 6 V brushed DC motor combined with a 46.85:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 2248.86 counts per revolution of the gearbox’s output shaft. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in diameter and extends 12.5 mm from the face plate of the gearbox. This gearmotor is also available without an encoder.
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 6 V | 210 RPM, 500 mA | 9.1 kg⋅cm (130 oz⋅in), 6.0 A |
Alternatives available with variations in these parameter(s): gear ratio motor type encoders? Select variant…
Compare all products in 6V High-Power (HP) 25D mm Gearmotors.
| Description | Specs (17) | Pictures (11) | Resources (4) | FAQs (3) | On the blog (0) |
|---|
Dimensions
| Size: | 25D x 67L mm1 |
|---|---|
| Weight: | 101 g |
| Shaft diameter: | 4 mm2 |
General specifications
| Gear ratio: | 46.85:1 |
|---|---|
| No-load speed @ 6V: | 210 rpm3 |
| No-load current @ 6V: | 0.50 A4 |
| Stall current @ 6V: | 6.0 A5 |
| Stall torque @ 6V: | 9.1 kg·cm5 |
| Max output power @ 6V: | 4.9 W |
| Motor type: | 6V, 6.0A stall (HP 6V) |
Performance at maximum efficiency
| Max efficiency @ 6V: | 37 % |
|---|---|
| Speed at max efficiency: | 170 rpm |
| Torque at max efficiency: | 1.6 kg·cm |
| Current at max efficiency: | 1.3 A |
| Output power at max efficiency: | 2.9 W |
General specifications
| Lead length: | 8 in6 |
|---|---|
| Encoders?: | Y |
Notes:
- 1
- Length measurement is from gearbox face plate to back of encoder cap (it does not include the output shaft). See dimension diagram for details.
- 2
- D shaft.
- 3
- Typical; ±20%.
- 4
- Typical, ±50%; no-load current depends on internal friction, which is affected by many factors, including ambient temperature and duration of motor operation.
- 5
- Stalling is likely to damage the gearmotor. Stall parameters come from a theoretical extrapolation of performance at loads far from stall. As the motor heats up, as happens as it approaches an actual stall, the stall torque and current decrease.
- 6
- May vary by a few inches.
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
