Pololu Metal Gearmotors » 37D Metal Gearmotors » 12V 37D Metal Gearmotors »
12V Motor with 64 CPR Encoder for 37D mm Metal Gearmotors (No Gearbox, Helical Pinion)
This is the motor and encoder portion of our 12V 37D mm metal gearmotors with 64 CPR encoders. It does not include a gearbox, but the pinion gear on the output shaft works with all of our helical pinion 37D mm gearmotor gearboxes, so this can be used as a replacement motor or encoder for those gearboxes.
voltage | no-load performance | stall extrapolation |
---|---|---|
12 V | 10,000 RPM, 200 mA | 0.5 kg⋅cm (7 oz⋅in), 5.5 A |
Alternatives available with variations in these parameter(s): gear ratio motor type encoders? Select variant…
Description | Specs (15) | Pictures (8) | Resources (4) | FAQs (2) | On the blog (0) | Distributors (26) |
---|
Dimensions
Size: | 34.5D × 46.5L mm1 |
---|---|
Weight: | 110 g |
General specifications
Gear ratio: | 1:12 |
---|---|
No-load speed @ 12V: | 10000 rpm |
No-load current @ 12V: | 0.2 A |
Stall current @ 12V: | 5.5 A3 |
Stall torque @ 12V: | 0.5 kg·cm3 |
No-load speed @ 6V: | 5000 rpm4 |
No-load current @ 6V: | 0.15 A4 |
Stall current @ 6V: | 3.0 A4 |
Stall torque @ 6V: | 0.3 kg·cm4 |
Motor type: | 12V |
Lead length: | 20 cm5 |
Encoders?: | Y |
Encoder resolution: | 64 CPR |
Notes:
- 1
- Length measurement does not include motor shaft or pinion gear.
- 2
- This motor does not have a gearbox.
- 3
- Stalling can damage the motor. Stall parameters come from a theoretical extrapolation of performance at loads far from stall. As the motor heats up, as happens as it approaches an actual stall, the stall torque and current decrease.
- 4
- This motor will run at 6 V but is intended for operation at 12 V.
- 5
- May vary by a few centimeters.