Electronics » Sensors » Encoders »
Magnetic Encoder Pair Kit for 20D mm Metal Gearmotors, 20 CPR, 2.7-18V
Add quadrature encoders to your 20D mm metal gearmotors (extended back shaft version required) with this kit that uses a magnetic disc and Hall effect sensors to provide 20 counts per revolution of the motor shaft. The sensors operate from 2.7 V to 18 V and provide digital outputs that can be connected directly to a microcontroller or other digital circuit. This module is compatible with all of the dual-shaft 20D mm metal gearmotors we carry.
| Description | Specs (7) | Pictures (11) | Resources (5) | FAQs (0) | On the blog (2) | Distributors (57) |
|---|
|
Magnetic Encoder Pair Kit for 20D mm Metal Gearmotors, 20 CPR, 2.7-18V. |
|---|
 |
Magnetic Encoder Kit for 20D mm Metal Gearmotors assembled on a 20D mm metal gearmotor with extended motor shaft. |
|---|
 |
Magnetic Encoder Kit for 20D mm Metal Gearmotors assembled on a 20D mm metal gearmotor with extended motor shaft. |
|---|
 |
Magnetic Encoder Kit for 20D mm Metal Gearmotors assembled on a 20D mm metal gearmotor with extended motor shaft. |
|---|
 |
Push the magnetic disc onto the motor shaft so the shaft protrudes approximately 1 mm past the disc. |
|---|
 |
Magnetic Encoder Kit for 20D mm Metal Gearmotors, motor-side view of PCB with dimensions. |
|---|
 |
Magnetic Encoder Kit for 20D mm Metal Gearmotors, magnet-side view of PCB with labeled pinout. |
|---|
 |
Encoder A and B outputs of a magnetic encoder on a 6V 20D mm metal gearmotor running at 6V. |
|---|
 |
Magnetic Encoder Kit for 20D mm Metal Gearmotors schematic diagram. |
|---|
 |
Magnetic Encoder Kit for 20D mm Metal Gearmotors, magnet-side view of PCB. |
|---|
 |
Magnetic Encoder Kit for 20D mm Metal Gearmotors, motor-side view of PCB. |
|---|
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
