Servos » RC Servos » Continuous Rotation Servos »
Surplus SpringRC SM-S4303R Continuous Rotation Servo Pair (Two Servos)
These are surplus SM-S4303R standard-sized servos continuous rotation servos that we are able to offer at specially discounted pricing. They are functionally identical to our stock SM-S4303R servos except for the direction of rotation, which is reversed, and we are selling them in pairs to help differentiate them. This product is a two-pack of servos, so ordering one unit will get you two servos.
Key specs at 6 V: 54 RPM (no-load), 71 oz-in (5.1 kg-cm), 41 g, CW rotation for pulse widths above the rest point.
| Description | Specs (9) | Pictures (8) | Resources (0) | FAQs (1) | On the blog (1) |
|---|
- What are the wires coming out of my servo?
Most standard radio control (RC) servos have three wires, each a different color. Usually, they are either black, red, and white, or they are brown, red, and orange/yellow:
- brown or black = ground (GND, battery negative terminal)
- red = servo power (Vservo, battery positive terminal)
- orange, yellow, white, or blue = servo control signal line
Please check the specs for your servo to determine the proper power supply voltage, and please take care to plug the servo into your device in the proper orientation (plugging it in backwards could break the servo or your device).
Note: Some of the servos we carry also have an optional fourth green wire that is separate from the three standard ones. This wire provides access to the feedback potentiometer, allowing you to directly measure the position of the output. The servos with this extra wire have "with Position Feedback" at the ends of their product names. The picture below is an example of such a servo.
FEETECH Sub-Micro Servo FS0403-FB with Position Feedback.
Related products
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
