MP 12V Motor with 48 CPR Encoder for 25D mm Metal Gearmotors (No Gearbox, No End Cap)
This is the motor and encoder portion of our medium-power (HP), 12V 25D mm metal gearmotors with 48 CPR encoders. It does not include a gearbox, but the pinion gear on the output shaft works with all of our 25D mm gearmotor gearboxes, so this can be used as a replacement motor or encoder for those gearboxes.
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 12 V | 7800 RPM, 50 mA | 0.2 kg⋅cm (2.7 oz⋅in), 2.1 A |
You can use the following selection boxes to choose from all of our 25D metal gearmotor versions:
Alternatives available with variations in these parameter(s): gear ratio motor type encoders? Select variant…
| Description | Specs (13) | Pictures (5) | Resources (2) | FAQs (1) | On the blog (0) |
|---|
|
25D mm motor with 48 CPR encoder (no gearbox). |
|---|
 |
25D mm motor with 48 CPR encoder (no gearbox). |
|---|
 |
25D mm metal gearmotor with 48 CPR encoder: close-up view of encoder. |
|---|
 |
The 25D and 37D mm metal gearmotors with encoders have cables that are terminated with a 6-pin, 0.1″-pitch female connector. |
|---|
 |
Encoder A and B outputs for 25D mm HP 6V metal gearmotor with 48 CPR encoder (motor running at 6 V). |
|---|
Related products
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
