Motion Control Modules » Stepper Motor Drivers » TB67S2x9FTG Stepper Motor Driver Carriers »
TB67S249FTG Stepper Motor Driver Compact Carrier (Header Pins Soldered)
This version of our TB67S249FTG Stepper Motor Driver Compact Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. The TB67S249FTG has a wide operating voltage range of 10 V to 47 V, and our carrier board can deliver approximately 1.6 A per phase continuously without a heat sink or forced air flow (up to 4.5 A peak). Please see the TB67S249FTG Stepper Motor Driver Compact Carrier product page for more information about the driver.
Alternatives available with variations in these parameter(s): continuous current per phase header pins soldered? Select variant…
Compare all products in TB67S2x9FTG Stepper Motor Driver Carriers or 16-pin Stepper Motor Drivers.
| Description | Specs (15) | Pictures (6) | Resources (13) | FAQs (4) | On the blog (0) | Distributors (37) |
|---|
|
TB67S249FTG Stepper Motor Driver Compact Carrier (Header Pins Soldered). |
|---|
 |
TB67S249FTG Stepper Motor Driver Compact Carrier (top view). |
|---|
 |
TB67S2x9FTG Stepper Motor Driver Compact Carrier, bottom view with dimensions. |
|---|
 |
Bridge this SMT jumper with solder to change the AGC bottom limit from 60% to 80% on the TB67S2x9FTG Stepper Motor Driver Compact Carrier. |
|---|
 |
Minimal wiring diagram for connecting a microcontroller to a TB67S2x9FTG stepper motor driver compact carrier. |
|---|
 |
Schematic diagram of the TB67S249FTG/TB67S279FTG Stepper Motor Driver Compact Carrier. |
|---|
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
