Electronics » RC Interface » RC Switches »
Pololu 4-Channel RC Servo Multiplexer (Partial Kit)
This compact four-channel multiplexer of hobby radio control pulses allows for easy switching between two independent signal sources. An auxiliary channel selects whether the output comes from the master or the slave source. The activation threshold and direction are configurable. Surface-mount components are pre-assembled on the PCB, but through-hole components are not installed and require soldering.
Alternatives available with variations in these parameter(s): partial kit? Select variant…
| Description | Specs (7) | Pictures (8) | Resources (5) | FAQs (0) | On the blog (0) |
|---|
Documentation and other information
-
Pololu RC Switch User’s Guide (Printable PDF)
User’s manual for the Pololu RC Switch with Medium Low-Side MOSFET and the Pololu RC Switch with Relay.
File downloads
-
Pololu 4-Channel RC Servo Multiplexer schematic diagram (210k pdf)
Printable schematic diagram of the 4-Channel RC Servo Multiplexer schematic diagram.
-
Dimension diagram of the Pololu 4-Channel RC Servo Multiplexer (308k pdf)
-
3D model of the Pololu 4-Channel RC Servo Multiplexer (9MB step)
-
Drill guide for the Pololu 4-Channel RC Servo Multiplexer (31k dxf)
This DXF drawing shows the locations of all of the board’s holes.
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
