Development Boards (Programmable Controllers) » Raspberry Pi » Raspberry Pi Expansion Boards »
Dual TB9051FTG Motor Driver for Raspberry Pi (Assembled)
This add-on board enables a Raspberry Pi B+, Pi A+, Pi 2 or Pi 3 to drive a pair of brushed DC motors. Its dual TB9051FTG motor drivers operate from 4.5 V to 28 V and can deliver a continuous 2.6 A (5 A peak) per motor. The default pin mappings make it easy to get started using our provided software, but the board also exposes most of the driver chips’ I/O pins for more specialized applications. This version ships fully assembled with connectors soldered in.
Alternatives available with variations in these parameter(s): partial kit? Select variant…
Compare all products in Raspberry Pi Expansion Boards or Brushed DC Motor Drivers.
| Description | Specs (14) | Pictures (11) | Resources (7) | FAQs (0) | On the blog (1) | Distributors (1) |
|---|
Dimensions
| Size: | 65 mm × 56 mm |
|---|---|
| Weight: | 28 g |
General specifications
| Motor driver: | TB9051FTG |
|---|---|
| Motor channels: | 2 |
| Minimum operating voltage: | 4.5 V1 |
| Maximum operating voltage: | 28 V2 |
| Continuous output current per channel: | 2.6 A3 |
| Peak output current per channel: | 5 A |
| Current sense: | 0.5 V/A |
| Maximum PWM frequency: | 20 kHz |
| Reverse voltage protection?: | Y4 |
| Partial kit?: | N |
Identifying markings
| PCB dev codes: | rpe05a |
|---|---|
| Other PCB markings: | 0J11290 |
Notes:
- 1
- Operation from 4.5 V to 8 V reduces maximum current output.
- 2
- Transient operation (< 500 ms) up to 40 V.
- 3
- Typical results at room temperature with VIN > 8 V and both channels running 90% duty cycle. Operation from 4.5 V to 8 V reduces maximum current output.
- 4
- On motor voltage only; logic voltage does not have reverse protection.
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
