Pololu Dual G2 High-Power Motor Driver 24v18 Shield for Arduino

Pololu item #: 2518
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant

Price break Unit price (US$)
1 79.95
5 73.55
25 67.67
100 62.26


backorders allowed

This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 40 V operating range and are efficient enough to deliver a continuous 18 A without a heat sink. The drivers offer basic current sensing and current limiting functionality, and they accept ultrasonic PWM frequencies for quieter operation. The Arduino pin mappings can all be customized if the defaults are not convenient, and the motor driver control lines are broken out along the left side of the shield for general-purpose use without an Arduino.

 Description Specs (13) Pictures (14) Resources (8) FAQs (0) On the blog (1) 

Pololu Dual G2 High-Power Motor Driver 24v18 Shield for Arduino.

Pololu Dual G2 High-Power Motor Driver 24v18 Shield for Arduino with included hardware.

Pololu Dual G2 High-Power Motor Driver Shield controlling a pair of high-power motors.

Pololu Dual G2 High-Power Motor Driver Shield being controlled by an A-Star 32U4 Prime.

For high-current installations, motor and power supply wires should be soldered directly to the driver (the supplied terminal blocks are only rated for up to 16 A).

Pololu Dual G2 High-Power Motor Driver 24v18 Shield for Arduino.

Pololu Dual G2 High-Power Motor Driver 18v22 or 24v18 Shield for Arduino, bottom view.

Pololu Dual G2 High-Power Motor Driver 18v22 or 24v18 Shield for Arduino, bottom view with dimensions.

Current limit vs. VREF resistor for the Pololu Dual G2 High-Power Motor Driver 24v18.

Dual G2 high-power motor driver shield with an Arduino (shield and Arduino powered separately).

Dual G2 high-power motor driver shield powering an Arduino with the shield’s VM bus (reverse-protected VIN).

Dual G2 high-power motor driver shield powering an Arduino with the shield’s 7.5 V regulator (VREG).

Dual G2 high-power motor driver shield connected to a microcontroller (dashed connections are optional).

Dual G2 high-power motor driver shield power bus diagram. All of the square ground pads are internally connected.


Related Products

Pololu Dual G2 High-Power Motor Driver 18v18 Shield for Arduino
Pololu Dual G2 High-Power Motor Driver 24v14 Shield for Arduino
Pololu Dual G2 High-Power Motor Driver 18v22 Shield for Arduino
Pololu Dual VNH5019 Motor Driver Shield for Arduino
Pololu Dual MC33926 Motor Driver Shield for Arduino
Pololu Dual G2 High-Power Motor Driver 24v14 for Raspberry Pi (Assembled)
Pololu Dual G2 High-Power Motor Driver 18v22 for Raspberry Pi (Partial Kit)
Pololu G2 High-Power Motor Driver 24v13
Pololu G2 High-Power Motor Driver 18v17
Pololu G2 High-Power Motor Driver 24v21
Pololu G2 High-Power Motor Driver 18v25
Pololu H2 High-Power Motor Driver 36v11 CS
Jrk G2 18v19 USB Motor Controller with Feedback
Jrk G2 24v21 USB Motor Controller with Feedback
A-Star 32U4 Prime LV microSD
A-Star 32U4 Prime SV microSD
19:1 Metal Gearmotor 37Dx52L mm 12V (Helical Pinion)
34:1 Metal Gearmotor 25Dx52L mm HP 6V
ACS711KEXLT-31AB-T Current Sensor Carrier -31A to +31A
T Connector Male-Female Pair
Stackable 0.100" Female Header Set for Arduino Shields

Related Categories

Pololu Dual G2 High-Power Motor Driver Shields
Pololu High-Power Motor Drivers
Shields for Arduino
A-Star 32U4 Prime
Arduino-Compatible
Development Boards (Programmable Controllers)
Brushed DC Motor Drivers
Brushed DC Motor Controllers
Motors and Gearboxes
25D Metal Gearmotors
37D Metal Gearmotors
0.1″ (2.54 mm) Male Headers
0.1″ (2.54 mm) Female Headers
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors