Pololu Metal Gearmotors » Micro Metal Gearmotors » Micro Metal Gearmotors with Extended Motor Shafts »
10:1 Micro Metal Gearmotor MP 6V with Extended Motor Shaft
This is a miniature brushed DC metal gearmotor with a gearbox cross section of 10×12 mm and a 9 mm long, 3 mm diameter D-shaped gearbox output shaft.
| motor/brush type | gearbox | encoder | |
|---|---|---|---|
| MP 6V: medium-power 6V with precious metal brushes | 9.96:1 with brass plates | encoder-compatible (extended motor shaft) | |
| voltage | no-load performance | stall extrapolation* |
|---|---|---|
| 6 V | 2200 RPM, 70 mA | 0.11 kg⋅cm (1.5 oz⋅in), 0.67 A |
| * Note: Stall torque and stall current specifications are theoretical values; stalls could damage the motor or gearbox. | ||
Alternatives available with variations in these parameter(s): gear ratio motor type encoder Select variant…
Compare all products in Micro Metal Gearmotors with Extended Motor Shafts or 6V Medium-Power (MP) Micro Metal Gearmotors.
| Description | Specs (11) | Pictures (17) | Resources (3) | FAQs (2) | On the blog (2) | Distributors (0) |
|---|
-
Jeremy's line following robot: Zumo Slim
- 15 May 2015I recently competed in the LVbots line following robot challenge, where I took third place with the fourth fastest robot (due to lucky placement in...
-
New products: MP micro metal gearmotors with extended motor shafts
- 29 October 2014Several gear ratios of our medium-power (MP) micro metal gearmotors are now available with extended motor shafts: 10:1 MP micro metal gearmotor...
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
