Pololu Metal Gearmotors » Micro Metal Gearmotors » Micro Metal Gearmotors with Extended Motor Shafts »
1000:1 Micro Metal Gearmotor HP 6V with Extended Motor Shaft
This is a miniature brushed DC metal gearmotor with a gearbox cross section of 10×12 mm and a 9 mm long, 3 mm diameter D-shaped gearbox output shaft.
| motor/brush type | gearbox | encoder | |
|---|---|---|---|
| HP 6V: high-power 6V with precious metal brushes | 986.41:1 with brass plates | encoder-compatible (extended motor shaft) | |
| voltage | no-load performance | stall extrapolation* |
|---|---|---|
| 6 V | 31 RPM, 100 mA | 12 kg⋅cm (166 oz⋅in), 1.6 A |
| * Note: Stall torque and stall current specifications are theoretical values; stalls could damage the motor or gearbox. | ||
Alternatives available with variations in these parameter(s): gear ratio motor type encoder Select variant…
Compare all products in Micro Metal Gearmotors with Extended Motor Shafts or 6V High-Power (HP) Micro Metal Gearmotors.
| Description | Specs (15) | Pictures (17) | Resources (3) | FAQs (2) | On the blog (1) |
|---|
-
Open-source myoelectric hand prosthesis
- 18 May 2017Pololu customer Alvaro Villoslada made this impressive open-source 3D-printable hand prothesis. Each finger uses a 1000:1 Micro Metal Gearmotor HP...
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
