Pololu Metal Gearmotors » Micro Metal Gearmotors » Micro Metal Gearmotors with Extended Motor Shafts »
100:1 Micro Metal Gearmotor LP 6V with Extended Motor Shaft
This is a miniature brushed DC metal gearmotor with a gearbox cross section of 10×12 mm and a 9 mm long, 3 mm diameter D-shaped gearbox output shaft.
| motor/brush type | gearbox | encoder | |
|---|---|---|---|
| LP 6V: low-power 6V with precious metal brushes | 100.37:1 with brass plates | encoder-compatible (extended motor shaft) | |
| voltage | no-load performance | stall extrapolation* |
|---|---|---|
| 6 V | 130 RPM, 40 mA | 0.74 kg⋅cm (10 oz⋅in), 0.36 A |
| * Note: Stall torque and stall current specifications are theoretical values; stalls could damage the motor or gearbox. | ||
Alternatives available with variations in these parameter(s): gear ratio motor type encoder Select variant…
Compare all products in Micro Metal Gearmotors with Extended Motor Shafts or 6V Low-Power (LP) Micro Metal Gearmotors.
| Description | Specs (16) | Pictures (17) | Resources (3) | FAQs (2) | On the blog (1) | Distributors (0) |
|---|
-
R2-DR, Kevin's dead reckoning robot
- 26 March 2014When I first started planning a robot for the recent LVBots dead reckoning competition, it was more or less a conventional design—a flat chassis...
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
