Pololu Metal Gearmotors » Micro Metal Gearmotors » Micro Metal Gearmotors with Extended Motor Shafts »
5:1 Micro Metal Gearmotor LP 6V with Extended Motor Shaft
This is a miniature brushed DC metal gearmotor with a gearbox cross section of 10×12 mm and a 9 mm long, 3 mm diameter D-shaped gearbox output shaft.
| motor/brush type | gearbox | encoder | |
|---|---|---|---|
| LP 6V: low-power 6V with precious metal brushes | 4.995:1 with brass plates | encoder-compatible (extended motor shaft) | |
| voltage | no-load performance | stall extrapolation* |
|---|---|---|
| 6 V | 2500 RPM, 50 mA | 0.05 kg⋅cm (0.7 oz⋅in), 0.36 A |
| * Note: Stall torque and stall current specifications are theoretical values; stalls could damage the motor or gearbox. | ||
Alternatives available with variations in these parameter(s): gear ratio motor type encoder Select variant…
Compare all products in Micro Metal Gearmotors with Extended Motor Shafts or 6V Low-Power (LP) Micro Metal Gearmotors.
| Description | Specs (11) | Pictures (17) | Resources (3) | FAQs (2) | On the blog (0) | Distributors (0) |
|---|
Dimensions
| Size: | 10 × 12 × 25 mm1 |
|---|---|
| Weight: | 9.5 g |
| Shaft diameter: | 3 mm2 |
General specifications
| Gear ratio: | 4.995:1 |
|---|---|
| No-load speed @ 6V: | 2500 rpm3 |
| No-load current @ 6V: | 0.05 A4 |
| Stall current @ 6V: | 0.36 A |
| Stall torque @ 6V: | 0.05 kg·cm |
| Max output power @ 6V: | 0.37 W |
| Encoder: | encoder-compatible (extended motor shaft) |
| Motor type: | 0.36A stall @ 6V (LP 6V) |
Notes:
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
