ACS711LC Current Sensor Carrier -25A to +25A

Pololu item #: 2198
Brand: Pololu
Status: Special Order Only 

This product has been discontinued.

This has been replaced by the ACS711EX current sensor carrier -31A to +31A, which features the newer “EX” IC package with a larger optimized sensing range and reduced internal resistance. The ACS711EX carrier has the same board size, pinout, and hole locations, so it can generally be used as a drop-in replacement.

This board is a simple carrier of Allegro’s ±25A ACS711 Hall effect-based linear current sensor with overcurrent fault output, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 100 V. This version accepts a bidirectional current input with a magnitude up to 25 A and outputs a proportional analog voltage centered at Vcc/2 with a typical error of ±5%. It operates from 3 V to 5.5 V, so it can interface directly to both 3.3 V and 5 V systems.

 Description Specs (6) Pictures (6) Resources (1) FAQs (0) On the blog (0) 

File downloads

Related Products

ACS711KEXLT-31AB-T Current Sensor Carrier -31A to +31A
ACS711KEXLT-15AB-T Current Sensor Carrier -15.5A to +15.5A
ACS724LLCTR-05AB Current Sensor Carrier -5A to +5A
ACS709 Current Sensor Carrier -75A to +75A
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Right Angle
Screwless Terminal Block: 2-Pin, 0.1″ Pitch, Side Entry (3-Pack)
Screw Terminal Block: 2-Pin, 3.5 mm Pitch, Side Entry (4-Pack)
Screw Terminal Block: 2-Pin, 5 mm Pitch, Top Entry (4-Pack)
Premium Jumper Wire 50-Piece 10-Color Assortment F-F 6"

Related Categories

Current Sensors
Terminal Blocks
Premium Jumper Wires
Sensors
Electronics Prototyping
Motion Control Modules
Motors and Gearboxes
RC Servos
Pololu High-Power Motor Drivers
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors