Motion Control Modules » Brushed DC Motor Drivers » Pololu High-Power Motor Drivers »
Pololu High-Power Motor Driver 24v23 CS
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The compact 1.8×1.2-inch board supports a wide 5.5 to 40 V voltage range and is efficient enough to deliver a continuous 23 A without a heat sink. This version outputs an analog voltage proportional to the motor current, and an extra control input allows for coasting in addition to the driving and braking offered by the other Pololu high-power motor drivers.
| Description | Specs (11) | Pictures (4) | Resources (4) | FAQs (1) | On the blog (0) |
|---|
File downloads
-
IPD036N04L G datasheet (236k pdf)
Datasheet for the Infineon IPD036N04L G OptiMOS 3 Power-Transistor.
-
Allegro ACS714 current sensor datasheet (701k pdf)
-
High-Power Motor Driver CS drill guide (26k dxf)
This DXF drawing shows the locations of all of the board’s holes. (DXF applies to the 18v25, 24v23 and 36v20 High-Power Motor Driver CS boards)
Recommended links
-
Active Magnetic Bearing: Tripod Floater v2.0
Meindert Norg from Norg Consulting (www.NorgConsulting.com) demonstrates his active magnetic bearing, Tripod Floater. The closed-loop system uses three Pololu 18v15 high-power motor drivers as PWM amplifiers to power the magnetic coils that keep the module floating beneath the metal plate. By Meindert Norg, August, 2009. February, 2010 update: the Tripod Floater is now wireless! Version 2.2 video
Related products
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
