Pololu Simple Motor Controller 18v7 (Fully Assembled)

Documentation and other information

• 

  Pololu Simple Motor Controller User’s Guide (Printable PDF)

  User’s manual for the Pololu Simple Motor Controllers.
• Pololu USB Software Development Kit

  The Pololu USB SDK contains example code for making your own applications that use native USB to control the Jrk Motor Controller, Maestro Servo Controller, Simple Motor Controller, or USB AVR Programmer.
• 

  Application Note: Using AutoHotkey with Pololu USB Products (Printable PDF)

  An application note about using AutoHotkey for Windows to control Pololu USB products.

File downloads

• Simple Motor Controller Windows Drivers and Software (release 121204) (5MB zip)

  This ZIP archive contains the installation files for the Simple Motor Control Center, the Simple Motor Controller command-line utility (SmcCmd), and the required USB drivers for Microsoft Windows.

• Simple Motor Controller Linux Software (release 101119) (115k gz)

  This tar/gzip archive contains the binary executable files for the Pololu Simple Motor Control Center (SmcCenter) and the Simple Motor Controller command-line utility (SmcCmd) for Linux. Use “tar -xzvf filename.tar.gz” to extract it.

• Firmware version 1.04 for the Simple Motor Controllers (266k fmi)

  Use this file with the Pololu Simple Motor Control Center to upgrade your Simple Motor Controller’s firmware. See the instructions in the “Upgrading Firmware” section of the user’s guide for more information.

• Drill guide for Simple Motor Controller 18v7 (103k dxf)

  This DXF drawing shows the locations of all of the board’s holes.

• Drill guide for Simple High-Power Motor Controller 18v15 or 24v12 (116k dxf)

  This DXF drawing shows the locations of all of the board’s holes.

• Drill guide for Simple High-Power Motor Controller 18v25 or 24v23 (153k dxf)

  This DXF drawing shows the locations of all of the board’s holes.