Motion Control Modules » Brushed DC Motor Controllers » Pololu Simple Motor Controllers »
High-Power Simple Motor Controller G2 24v12 (Connectors Soldered)
This powerful motor controller makes basic control of a brushed DC motor easy, with quick configuration over USB using our free software. It supports five control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), and hobby radio control (RC). This version offers a wide 6.5 V to 40 V operating range and can deliver continuous output currents up to 12 A without a heat sink. This version ships with soldered header pins and terminal blocks.
Alternatives available with variations in these parameter(s): version Select variant…
Compare all products in Pololu Simple Motor Controllers or Pololu G2 Simple Motor Controllers.
| Description | Specs (14) | Pictures (4) | Resources (9) | FAQs (1) | On the blog (1) |
|---|
Dimensions
| Size: | 2.1″ × 1.1″ × 0.5″ |
|---|---|
| Weight: | 12.5 g |
General specifications
| Motor channels: | 1 |
|---|---|
| Control interface: |
USB; non-inverted TTL serial; I²C; RC servo pulses; analog voltage1 |
| Minimum operating voltage: | 6.5 V |
| Maximum operating voltage: | 40 V2 |
| Continuous output current per channel: | 12 A3 |
| Maximum PWM frequency: | 22.5 kHz |
| Maximum logic voltage: | 3.3 V4 |
| Reverse voltage protection?: | Y |
| Version: | G2 24v12 (40 V max, 12 A max continuous) |
| Connectors soldered?: | Y |
Identifying markings
| PCB dev codes: | umc08a |
|---|---|
| Other PCB markings: | 0J11672, blank white box |
Notes:
- 1
- Autodetects baud rates between 1200 and 500,000 bps, or can be set to any fixed baud rate in this range.
- 2
- Absolute maximum; higher voltages can permanently destroy the motor driver. Recommended maximum is approximately 34 V, which leaves a safety margin for ripple voltage on the supply line.
- 3
- Typical results at room temperature running at 90% duty cycle.
- 4
- All digital inputs are 5V tolerant.
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
