Pololu Metal Gearmotors » Micro Metal Gearmotors » 6V Low-Power (LP) Micro Metal Gearmotors »

10:1 Micro Metal Gearmotor LP 6V

Quantity:
backorders allowed

This is a miniature brushed DC metal gearmotor with a gearbox cross section of 10×12 mm and a 9 mm long, 3 mm diameter D-shaped gearbox output shaft.

motor/brush type	gearbox	encoder
LP 6V: low-power 6V with precious metal brushes	9.96:1 with brass plates		no encoder

voltage	no-load performance	stall extrapolation*
6 V	1300 RPM, 40 mA	0.10 kg⋅cm (1.4 oz⋅in), 0.36 A
* Note: Stall torque and stall current specifications are theoretical values; stalls could damage the motor or gearbox.

Alternatives available with variations in these parameter(s): gear ratio motor type encoder Select variant…

	Description		Specs (11)		Pictures (17)		Resources (3)		FAQs (2)		On the blog (1)		Distributors (24)

1: Output shaft adds 10 mm to the 26 mm length. See dimension diagram for details.
2: D shaft.
3: Typical; ±20%.
4: Typical, ±50%; no-load current depends on internal friction, which is affected by many factors, including ambient temperature and duration of motor operation.

	MP6550 Single Brushed DC Motor Driver Carrier
	ACS724LLCTR-2P5AB Current Sensor Carrier -2.5A to +2.5A
	Pololu Micro Metal Gearmotor Bracket Extended Pair
	Pololu Micro Metal Gearmotor Bracket Pair - Black
	Pololu Micro Metal Gearmotor Bracket Pair - White
	Pololu Universal Aluminum Mounting Hub for 3mm Shaft, M3 Holes (2-Pack)
	Pololu Universal Aluminum Mounting Hub for 3mm Shaft, #2-56 Holes (2-Pack)
	12mm Hex Wheel Adapter for 3mm Shaft (2-Pack)
	Solarbotics RW2i Wheel (internal set screw)
	Magnetic Encoder Disc for Micro Metal Gearmotors, OD 7.65 mm, ID 1.0 mm, 12 CPR (Bulk)
	Machine Screw: M1.6, 3mm Length, Phillips (6-pack)

	6V Low-Power (LP) Micro Metal Gearmotors
	Micro Metal Gearmotors
	Pololu Wheels and Tracks for 3mm D-Shafts
	6-Pin JST SH-Style Cables
	6-Pin JST SH-Style Connector Boards
	Encoders for Micro Metal Gearmotors
	Brushed DC Motor Drivers
	Motoron M1x550 Single Motor Controllers
	Motoron M2x550 Dual Motor Controllers
	Motoron M3S550 Triple Motor Controller Shield for Arduino
	Motoron M3H550 Triple Motor Controller for Raspberry Pi
	Brushed DC Motor Controllers
	Current Sensors
	Pololu Plastic Gearmotors
	20D Metal Gearmotors
	25D Metal Gearmotors
	37D Metal Gearmotors
	Zumo Robots and Accessories
	3pi Robots and Accessories

	MP6550 Single Brushed DC Motor Driver Carrier
	ACS724LLCTR-2P5AB Current Sensor Carrier -2.5A to +2.5A
	Pololu Micro Metal Gearmotor Bracket Extended Pair
	Pololu Micro Metal Gearmotor Bracket Pair - Black
	Pololu Micro Metal Gearmotor Bracket Pair - White
	Pololu Universal Aluminum Mounting Hub for 3mm Shaft, M3 Holes (2-Pack)
	Pololu Universal Aluminum Mounting Hub for 3mm Shaft, #2-56 Holes (2-Pack)
	12mm Hex Wheel Adapter for 3mm Shaft (2-Pack)
	Solarbotics RW2i Wheel (internal set screw)
	Magnetic Encoder Disc for Micro Metal Gearmotors, OD 7.65 mm, ID 1.0 mm, 12 CPR (Bulk)
	Machine Screw: M1.6, 3mm Length, Phillips (6-pack)

	6V Low-Power (LP) Micro Metal Gearmotors
	Micro Metal Gearmotors
	Pololu Wheels and Tracks for 3mm D-Shafts
	6-Pin JST SH-Style Cables
	6-Pin JST SH-Style Connector Boards
	Encoders for Micro Metal Gearmotors
	Brushed DC Motor Drivers
	Motoron M1x550 Single Motor Controllers
	Motoron M2x550 Dual Motor Controllers
	Motoron M3S550 Triple Motor Controller Shield for Arduino
	Motoron M3H550 Triple Motor Controller for Raspberry Pi
	Brushed DC Motor Controllers
	Current Sensors
	Pololu Plastic Gearmotors
	20D Metal Gearmotors
	25D Metal Gearmotors
	37D Metal Gearmotors
	Zumo Robots and Accessories
	3pi Robots and Accessories