Hardware » Brackets » Motor Brackets »
Pololu Micro Metal Gearmotor Bracket Extended Pair
This compact bracket enables convenient mounting of popular, Sanyo-style micro metal gearmotors. The white plastic bracket encloses the otherwise exposed gears, and the mounting tabs capture the nuts for easy installation. This version has mounting tabs that allow for use with the Pololu Wheel 42×19 mm and encoder. The brackets are sold in pairs, and each bracket comes with two #2 screws and two nuts.
Compare all products in Motor Brackets or Brackets for Micro Metal Gearmotors.
| Description | Specs (2) | Pictures (9) | Resources (2) | FAQs (0) | On the blog (5) | Distributors (60) |
|---|
-
Aerial photography kite rig
- 29 September 2017Pololu customer Yvon Hache made this 3D-printed aerial photography rig that he shared in a forum post. The rig, trailing 100 feet below the kite,...
-
Amanda's line following robot: Newbie
- 5 June 2015Many of the engineers and robot enthusiasts here at Pololu competed in the LVBots 2015 line following competition. (For house rules and details...
-
Jeremy's line following robot: Zumo Slim
- 15 May 2015I recently competed in the LVbots line following robot challenge, where I took third place with the fourth fastest robot (due to lucky placement in...
-
Jamee's dead reckoning robot
- 30 April 2014Several Pololu employees made robots for the LVBots dead reckoning competition. Unfortunately, my robot didn’t work enough in time for the...
-
PID line follower with 5" robot chassis
- 18 April 2014This PID line follower, originally featured in this Let’s Make Robots post by user Enigmerald, uses our 5" Robot Chassis along with 30:1 MP micro...
Related products
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
