This is a carrier board for Allegro’s A5984 microstepping bipolar stepper motor driver. It offers eight different microstep resolutions (down to 1/32-step) and has over-current and over-temperature protection, and it features an adaptive decay algorithm that automatically optimizes the motor current waveform. This version has an adjustable current limit that can be set with an on-board potentiometer and a four-layer PCB for better thermal performance, allowing it to deliver up to approximately 1.2 A continuous per phase without a heat sink or forced air flow (2 A peak).

This version is item #5340 with soldered header pins, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. It has an adjustable current limit that can be set with an on-board potentiometer and a four-layer PCB for better thermal performance, allowing it to deliver up to approximately 1.2 A continuous per phase without a heat sink or forced air flow (2 A peak).

This is a carrier board for Allegro’s A5984 microstepping bipolar stepper motor driver. It offers eight different microstep resolutions (down to 1/32-step) and has over-current and over-temperature protection, and it features an adaptive decay algorithm that automatically optimizes the motor current waveform. This version has an adjustable current limit that can be set with an on-board potentiometer and can deliver up to approximately 1 A continuous per phase without a heat sink or forced air flow (2 A peak).

This version is item #5342 with soldered header pins, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. It has an adjustable current limit that can be set with an on-board potentiometer and can deliver up to approximately 1 A continuous per phase without a heat sink or forced air flow (2 A peak).

This is a carrier board for Allegro’s A5984 microstepping bipolar stepper motor driver. It offers eight different microstep resolutions (down to 1/32-step) and has over-current and over-temperature protection, and it features an adaptive decay algorithm that automatically optimizes the motor current waveform. This version has a fixed current limit of 1.5 A when VDD is 5 V or 1 A when VDD is 3.3 V and a four-layer PCB for better thermal performance.

NOTE: Additional cooling is required for operation at currents above 1.2 A per phase; this version is primarily intended for those who want 1 A per phase in 3.3V systems.

This version is item #5344 with soldered header pins, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. It has a fixed current limit of 1.5 A when VDD is 5 V or 1 A when VDD is 3.3 V and a four-layer PCB for better thermal performance.

NOTE: Additional cooling is required for operation at currents above 1.2 A per phase; this version is primarily intended for those who want 1 A per phase in 3.3V systems.

This is a carrier board for Allegro’s A5984 microstepping bipolar stepper motor driver. It offers eight different microstep resolutions (down to 1/32-step) and has over-current and over-temperature protection, and it features an adaptive decay algorithm that automatically optimizes the motor current waveform. This version has a fixed current limit of 1 A when VDD is 5 V or 660 mA when VDD is 3.3 V and a four-layer PCB for better thermal performance.

This version is item #5346 with soldered header pins, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. It has a fixed current limit of 1 A when VDD is 5 V or 660 mA when VDD is 3.3 V and a four-layer PCB for better thermal performance.

This is a carrier board for Allegro’s A5984 microstepping bipolar stepper motor driver. It offers eight different microstep resolutions (down to 1/32-step) and has over-current and over-temperature protection, and it features an adaptive decay algorithm that automatically optimizes the motor current waveform. This version has a fixed current limit of 750 mA when VDD is 5 V or 500 mA when VDD is 3.3 V.

This version is item #5348 with soldered header pins, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. It has a fixed current limit of 750 mA when VDD is 5 V or 500 mA when VDD is 3.3 V.

This is a carrier board for Allegro’s A5984 microstepping bipolar stepper motor driver. It offers eight different microstep resolutions (down to 1/32-step) and has over-current and over-temperature protection, and it features an adaptive decay algorithm that automatically optimizes the motor current waveform. This version has a fixed current limit of 500 mA when VDD is 5 V or 330 mA when VDD is 3.3 V.

This version is item #5350 with soldered header pins, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. It has a fixed current limit of 500 mA when VDD is 5 V or 330 mA when VDD is 3.3 V.