Electronics » Sensors » Proximity Sensors and Range Finders »
Pololu Digital Distance Sensors
We have several different versions of Pololu Digital Distance Sensors, all with the same dimensions and pinout:
| Digital output (does not provide distance measurement) |
||||||
| Sensor | Maximum range1 |
Minimum range |
Minimum update rate |
Jumper settings (4321) |
PCB ID | Price |
|---|---|---|---|---|---|---|
| #4050: Digital output, 5cm | 5 cm | < 5 mm | 145 Hz | 0000 | irs16a | $12.95 |
| #4052: Digital output, 10cm | 10 cm | < 5 mm | 115 Hz | 0010 | ||
| #4054: Digital output, 15cm | 15 cm | < 5 mm | 95 Hz | 0100 | ||
| #4066: Digital output, 25cm | 25 cm | < 1 mm | 100 Hz | 0000 | irs17a | $17.95 |
| #4067: Digital output, 50cm | 50 cm | < 1 mm | 100 Hz | 0001 | ||
| #4069: Digital output, 100cm | 100 cm | < 1 mm | 100 Hz | 0011 | ||
| #4077: Digital output, 200cm | 200 cm | < 1 mm | 30 Hz | 1011 | ||
| Pulse width output (provides distance measurement) |
|||||||
| Sensor | Maximum range1 |
Minimum range2 |
Resolution | Minimum update rate |
Jumper settings (4321) |
PCB ID | Price |
|---|---|---|---|---|---|---|---|
| #4064: Pulse width output, 50cm max | ~50 cm | 1 cm | 3 mm | 50 Hz | 1110 | irs16a | $12.95 |
| #4071: Pulse width output, 130cm max | ~130 cm | 4 cm | 1 mm | 100 Hz | 0101 | irs17a | $17.95 |
| #4079: Pulse width output, 300cm max | ~300 cm | 4 cm | 2 mm | 30 Hz | 1101 | ||
1 Effective range depends on object reflectivity and ambient lighting conditions.
2 Objects closer than the minimum distance can still be detected, but the measured distance might be inaccurate. The minimum detection range is < 5 mm for irs16a boards and < 1 mm for irs17a boards.
These are the output graphs for some of the digital output versions that just report if an object is in their detection range:
|
|
|
The output graph is a bit different for the versions that uses a pulse width to encode the measured distance. The output for these versions is similar to hobby servo control signals and is shown below as a function of time:
 |
Compare all products in this category
Products in category “Pololu Digital Distance Sensors”
| Pololu item #: 4050 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
This small lidar-based distance sensor detects the presence of objects within 5 cm (2″). It has a single digital output that drives low when an object is being detected; otherwise, it is high. It works over an input voltage range of 3.0 V to 5.5 V, and the 0.1″ pin spacing makes it easy to use with standard solderless breadboards and 0.1″ perfboards.
| Pololu item #: 4052 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This small lidar-based distance sensor detects the presence of objects within 10 cm (4″). It has a single digital output that drives low when an object is being detected; otherwise, it is high. It works over an input voltage range of 3.0 V to 5.5 V, and the 0.1″ pin spacing makes it easy to use with standard solderless breadboards and 0.1″ perfboards.
| Pololu item #: 4054 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This small lidar-based distance sensor detects the presence objects within 15 cm (6″). It has a single digital output that drives low when an object is being detected; otherwise, it is high. It works over an input voltage range of 3.0 V to 5.5 V, and the 0.1″ pin spacing makes it easy to use with standard solderless breadboards and 0.1″ perfboards.
| Pololu item #: 4066 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This small lidar-based distance sensor detects the presence of objects within 25 cm (10″). It has a single digital output that drives low when an object is being detected; otherwise, it is high. It works over an input voltage range of 3.0 V to 5.5 V, and the 0.1″ pin spacing makes it easy to use with standard solderless breadboards and 0.1″ perfboards.
| Pololu item #: 4067 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This small lidar-based distance sensor detects the presence of objects within 50 cm (20″). It has a single digital output that drives low when an object is being detected; otherwise, it is high. It works over an input voltage range of 3.0 V to 5.5 V, and the 0.1″ pin spacing makes it easy to use with standard solderless breadboards and 0.1″ perfboards.
| Pololu item #: 4069 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This small lidar-based distance sensor detects the presence of objects within 100 cm (39″). It has a single digital output that drives low when an object is being detected; otherwise, it is high. It works over an input voltage range of 3.0 V to 5.5 V, and the 0.1″ pin spacing makes it easy to use with standard solderless breadboards and 0.1″ perfboards.
| Pololu item #: 4077 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This small lidar-based distance sensor detects the presence of objects within 200 cm (79″). It has a single digital output that drives low when an object is being detected; otherwise, it is high. It works over an input voltage range of 3.0 V to 5.5 V, and the 0.1″ pin spacing makes it easy to use with standard solderless breadboards and 0.1″ perfboards.
| Pololu item #: 4064 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This small lidar-based distance sensor reports the distance of objects up to about 50 cm (20″) away with a pulsed signal similar to a hobby servo control signal. A digital microcontroller pin can be used to time the length of each high pulse, which encodes the measured distance. The sensor works over an input voltage range of 3.0 V to 5.5 V, and the 0.1″ pin spacing makes it easy to use with standard solderless breadboards and 0.1″ perfboards.
Note: The maximum range of 50 cm is only achievable for high-reflectance objects in good ambient conditions. Lower-reflectivity targets or poor ambient conditions will reduce the maximum range.
| Pololu item #: 4071 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This small lidar-based distance sensor reports the distance of objects up to about 130 cm (50″) away with a pulsed signal similar to a hobby servo control signal. A digital microcontroller pin can be used to time the length of each high pulse, which encodes the measured distance. The sensor works over an input voltage range of 3.0 V to 5.5 V, and the 0.1″ pin spacing makes it easy to use with standard solderless breadboards and 0.1″ perfboards.
Note: The maximum range of 130 cm is only achievable for high-reflectance objects in good ambient conditions. Lower-reflectivity targets or poor ambient conditions will reduce the maximum range.
| Pololu item #: 4079 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This small lidar-based distance sensor reports the distance of objects up to about 300 cm (120″) away with a pulsed signal similar to a hobby servo control signal. A digital microcontroller pin can be used to time the length of each high pulse, which encodes the measured distance. The sensor works over an input voltage range of 3.0 V to 5.5 V, and the 0.1″ pin spacing makes it easy to use with standard solderless breadboards and 0.1″ perfboards.
Note: The maximum range of 300 cm is only achievable for high-reflectance objects in good ambient conditions. Lower-reflectivity targets or poor ambient conditions will reduce the maximum range.
Related products
Related categories
Coupon Discount
BF24C283: Get 31% off one or more items from category Pololu Digital Distance Sensors (limit 5 per item). This offer is valid from 26 Nov 2024 to 02 Dec 2024.
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
