We’ve been hard at work over the past week putting up lots of new (but perhaps familiar-seeming) products. Here’s a quick recap:

24 new QTR reflectance sensor arrays

Our rapidly growing selection of new QTR sensors now includes high-density (HD) versions with 3, 6, and 9 channels, and medium-density (MD) versions with 2, 3, and 5 channels.

Each of these is available with two sensor options—traditional QTR and high-performance, low-current QTRX—and with analog or digital (RC) outputs, making 24 new products in all. Check out the QTR reflectance sensor category to see our full selection, which now stands at 68 varieties, and don’t forget to use our QTR introductory promotion to get 50% off any of these new sensors! (Limited to the first 100 customers who use coupon code QTRINTRO, limit 3 per item per customer.)

MP6500 stepper motor driver carriers with soldered header pins

We have received a number of requests to make the MP6500 stepper motor driver carriers we released earlier this year available with the header pins already soldered, so here they are! These carriers are available in two versions, one with the current limit set by a potentiometer, and one that allows for dynamic current limit control through a pair of digital inputs, and both are now available with soldered header pins:

• MP6500 Stepper Motor Driver Carrier, Potentiometer Current Control (Header Pins Soldered)
• MP6500 Stepper Motor Driver Carrier, Digital Current Control (Header Pins Soldered)

For a more detailed introduction to these drivers, see our original MP6500 carrier product announcement.

LPS25HB pressure/altitude sensor carrier

This is a minor update to our existing LPS25H pressure sensor carrier, which is now on clearance. The new version uses the same PCB as the original, hence the “©2014” on the silkscreen. and replaces the LPS25H with the newer LPS25HB, a drop-in replacement with the same register map and performance. Most people shouldn’t notice any difference using the new version compared to the old one, though ST says in their LPS25H upgrade guide (200k pdf) that the LPS25HB has better moisture resistance and reliability. That said, please keep in mind that we have not characterized the moisture resistance of the rest of the carrier, and moisture is generally something we recommend you keep away from all of our electronics.

Visually, the LPS25HB is easy to distinguish from the LPS25H as the former has a shiny silver square patch on the package while the latter has a more noticeable hole:

We have already started making our AltIMU-10 v4 and AltIMU-10 v5 IMUs with the LPS25HB, and we did so without using new product numbers or updating the pictures or descriptions because this change should not affect those products in any meaningful way (we have a new product number for the updated basic carrier since the specific sensor on there is pretty much the whole point of the product).

On a related note, we still have a lot of the even older LPS331AP pressure sensors/digital barometers left, so we have put the LPS331AP carriers on even more clearancy clearance!

Related products

	MP6500 Stepper Motor Driver Carrier, Potentiometer Current Control
	MP6500 Stepper Motor Driver Carrier, Potentiometer Current Control (Header Pins Soldered)
	MP6500 Stepper Motor Driver Carrier, Digital Current Control
	MP6500 Stepper Motor Driver Carrier, Digital Current Control (Header Pins Soldered)
	LPS25HB Pressure/Altitude Sensor Carrier with Voltage Regulator
	LPS25H Pressure/Altitude Sensor Carrier with Voltage Regulator
	AltIMU-10 v5 Gyro, Accelerometer, Compass, and Altimeter (LSM6DS33, LIS3MDL, and LPS25H Carrier)
	AltIMU-10 v4 Gyro, Accelerometer, Compass, and Altimeter (L3GD20H, LSM303D, and LPS25H Carrier)

QTRX-HD-05RC Reflectance Sensor Array, front and back views.

We now have five-sensor versions of our new high-density QTR reflectance sensor arrays. Like the versions already released, these new modules are available in analog and RC configurations and with two different sensor types, so this post covers four new products:

QTR-HD-05A Reflectance Sensor Array.

• QTR-HD-05RC Reflectance Sensor Array
• QTR-HD-05A Reflectance Sensor Array
• QTRX-HD-05RC Reflectance Sensor Array
• QTRX-HD-05A Reflectance Sensor Array

(Medium-density versions with 3 sensors on an 8 mm pitch will be available soon.)

We expect these to be the smallest arrays that still offer independent control of the odd and even emitters, which gives you extra options for detecting light reflected at various angles. For more information on our new QTR sensor family, you can see some of our previous blog post about the versions we have already released:

• New products: 1- and 31-channel QTR HD reflectance sensor arrays
• New products: more new QTR HD sensor arrays by student engineering interns
• New products: QTR HD sensor arrays by student engineering interns
• New product: high-density QTR reflectance sensor arrays

Don’t forget to get in on our QTR introductory promotion! Be one of the first 100 customers to use coupon code QTRINTRO and get any of these new sensors at half price! (Limit 3 per item per customer.)

Related products

	QTR-HD-05RC Reflectance Sensor Array: 5-Channel, 4mm Pitch, RC Output
	QTR-HD-05A Reflectance Sensor Array: 5-Channel, 4mm Pitch, Analog Output
	QTRX-HD-05RC Reflectance Sensor Array: 5-Channel, 4mm Pitch, RC Output, Low Current
	QTRX-HD-05A Reflectance Sensor Array: 5-Channel, 4mm Pitch, Analog Output, Low Current

We are having a Labor Day sale all weekend long with site-wide discounts of up to 25%! Check out the sale page for more information. Please note that we will be closed Monday, so orders placed after 2 PM Pacific Time today (Friday, August 31) will be shipped on Tuesday, September 4.

Pololu step-down voltage regulator D36V6Fx/D24V6Fx/D24V3Fx next to a 7805 voltage regulator in TO-220 package.

Wrapping up our new product releases for the month and for the summer is our new D36V6x family of step-down voltage regulators. These small regulator modules support a large input voltage range and are a great alternative to old three-terminal linear voltage regulators that waste a lot of power and get really hot. These new regulators can take an input voltage anywhere from a few tenths of a volt over the set output voltage up through an absolute max of 50 V, and they can deliver up to 600 mA. We have them available in seven fixed voltage options and two adjustable versions:

• D36V6F3: Fixed 3.3V output
• D36V6F5: Fixed 5V output
• D36V6F6: Fixed 6V output
• D36V6F7: Fixed 7.5V output
• D36V6F9: Fixed 9V output
• D36V6F12: Fixed 12V output
• D36V6F15: Fixed 15V output
• D36V6ALV: Adjustable 2.5 – 7.5 V output
• D36V6AHV: Adjustable 4 – 25 V output

Pololu step-down voltage regulator D36V6Ax/D24V6Ax/D24V3Ax, bottom view with dimensions.

You might notice that the board for the adjustable version shows a 2010 copyright year (the fixed version is an even smaller board, and we did not fit the year on there). That’s because these new regulators are actually old designs updated with new regulator chips that use the same package and pinout. The older products were our D24V3x and D24V6x families of regulators, which were based on the Texas Instruments LMR14203 and LMR14206 ICs. For the new D36V6x family, we are moving up to the newer LMR16006 regulator. This chip has several exciting new features that we think will make it our favorite general-purpose regulator for many of our products: higher maximum voltage, better low-dropout performance, and better quiescent current.

Higher maximum voltage

The LMR16006 has a 60 V maximum input voltage, up from the 42 V of the LMR1420x parts. Even 42 V covered most of our typical applications, but it’s not quite enough for 36V nominal applications, which are getting more common. Our more advanced, integrated products such as motor controllers are often limited by some complex part or circuit, such as a motor driver, and we would like the overall operating range of the product not to be reduced by the regulator. Many stepper motor drivers, such as TI’s DRV8825 or the Toshiba TB67S249FTG and TB67S279FTG that we released carriers for in June, support maximum input voltages of 45 or 50 volts. It’s nice not to be limited by your regulator when you are making systems with those kinds of parts.

For our new D36V6x modules, we are limited to the 50 V maximum of the capacitors from Vin to ground. Unfortunately, capacitor options get a lot more restricted (and expensive) once we go beyond 50 V, so we decided to stick with our old boards so that we could continue to offer these regulator modules at a low price while still providing some substantial improvements. We might still make a new board with higher-voltage capacitors for those who would like to make full use of the regulator’s 60 V maximum. (For anyone thinking of just removing the caps and putting on your own external ones, you might also want to change the diode, which is also a 60 V part.)

Better low-dropout performance

Having a higher maximum input voltage is nice, but often we’re trying to squeeze the most we can out of a dying battery, so it’s nice to have a low dropout, which is the voltage the regulator needs between the input and output. The older LMR1420x parts had an annoying quality of the dropout voltage going up as the load current went down. The newer LMR16006 has a nice, low dropout as the current goes down, so if you don’t need much current, you can get 5 V out with just 5.2 or 5.3 volts in. Here is a comparison of the dropout performance of the old and new regulators:

Typical dropout voltage of Pololu step-down voltage regulator D24VxF5.

Typical dropout voltages of Step-Down Voltage Regulator D36V6Fx.

Lower quiescent current

The new regulators also have much lower quiescent current, which is the current the regulator uses when it’s just sitting there and your load isn’t drawing anything. On the old regulators, the quiescent current was under 2 mA, and we did not characterize it beyond that. For these new regulators, it’s typically under 200 microamps, ten to twenty times better than the old regulators. I realize it’s not that amazing for modern regulators, but it’s nice to know that your low-cost, general-purpose regulator module isn’t wasting a lot of power.

Typical quiescent currents of Step-Down Voltage Regulator D36V6Fx.

Even when we put a new chip onto an old circuit board as I have described, we still test and characterize with different parts to get a good overall result. In the case of these regulators, where the circuit is quite simple, this phase of development is much more time consuming than laying out a circuit board. We build and test dozens of prototypes with different inductances, and even though you can’t see it in the pictures, we build the different voltage versions of the regulators with different inductors to get the best performance we can (within a given inductor type and size).

So how about getting a few to have around for general-purpose use on your next project? You can get one for just $3 as part of our introductory promotion using coupon code D36V6XINTRO, limited to the first 100 customers and to three per item (so you could get up to 27 regulators at that price if you get three of each voltage version). It’s always difficult for us to predict which versions will be how popular, so initial stock is limited, but we make these here in Las Vegas, so even if the version you want goes out of stock, you can backorder it with the promotional price, and we should be able to ship within a day or two.

Related products

	3.3V, 600mA Step-Down Voltage Regulator D36V6F3
	5V, 600mA Step-Down Voltage Regulator D36V6F5
	6V, 600mA Step-Down Voltage Regulator D36V6F6
	7.5V, 600mA Step-Down Voltage Regulator D36V6F7
	9V, 600mA Step-Down Voltage Regulator D36V6F9
	12V, 600mA Step-Down Voltage Regulator D36V6F12
	15V, 600mA Step-Down Voltage Regulator D36V6F15
	2.5-7.5V Adjustable Step-down Voltage Regulator D36V6ALV
	4-25V Adjustable Step-down Voltage Regulator D36V6AHV

This week, we released what we expect to be the extremes of our new line of QTR HD reflectance sensor arrays, with two sizes of a single-sensor board on the small end and a massive 31-sensor array for the maximum size. This picture shows the relative sizes of the boards, along with some of the intermediate sizes we have available:

The QTR Reflectance Sensor Arrays are available in many different sizes.

We made the two single-sensor sizes because we could make good arguments for each one. Part of the point of doing a single-sensor board is to make it really small, so you can fit it into tight spaces. But “really small” means different things depending on the dimensions you care about. So we have one version that is only 5 mm (0.2") wide, with components on both sides of the PCB, and one version that is 7.5 mm (0.3") wide, with components on just one side. The 7.5 mm wide version is a little thinner and flatter because it doesn’t have parts on one side, can be used with a 3×1, single row connector, and costs slightly less because of the single-sided assembly.

QTRX-HD-01RC Reflectance Sensor, front and back views.

QTRX-MD-01A Reflectance Sensor, front and back views.

As I mentioned in some of my earlier posts (here and here) about this new line of sensor arrays, we are using two sensor types: more economical units we are calling “QTR”, and higher-performance units with lenses that we are calling “QTRX”. The main appeal of the QTRX sensors is that they can give the same readings at much lower IR emitter currents, which can really make a big difference for big sensor arrays. But if you crank up the current in those QTRX sensors, you can also get more distance. We did not do that on the QTRX arrays because the sensor modules leak light out the sides and interfere with each other when they are closely spaced, but with these single-channel boards, we are also making available the QTRX sensors with the higher 30 mA maximum emitter current, which allows for a range of up to about 8 cm (about 3 inches). We are calling these sensors QTRXL.

This video (taken with an old camera that does not have as much IR filtering as most newer cameras) shows the IR light leakage around the side of the QTRX sensor module:

I should point out that all of these new QTR modules offer variable brightness control by varying the current through the emitter using the control pin. However, if you want to take advantage of the maximum brightness and range, and have several sensors close to each other, you will need some barriers between them to prevent them from blinding each other (or just turn on one emitter at a time).

The 31-sensor arrays are huge! Well, at least compared to the tiny single-sensor boards.

QTRX-HD-31RC Reflectance Sensor Array.

The routing on those boards is quite complex because adjacent IR emitters are not just wired in series (because we want to have separate even/odd emitter control, plus the alternate density population options I discussed in this post), so we ended up having to go to a 4-layer PCB to route it. This did let us make the vertical dimension a little lower, so the board is just 16.5 mm tall, compared to the 20 mm board height for the versions with 15 and fewer sensors. The 31-channel board is also 0.062" (1.6 mm) thick, compared to the thinner 0.040" (1 mm) boards we use for the lower channel counts. You can compare all the dimensions of the various boards in the detailed dimension diagram (1MB pdf).

The sixteen new boards we released this week brings the total available in this new QTR HD product line to 40. You can see the options neatly summarized in the tables below to pick the best array for your application.

Our introductory promotions are still going strong! Be one of the first 100 customers to use coupon code QTRINTRO and get any of these new sensors at half price! (Limit 3 per item per customer.)

Related products

	QTR-HD-01A Reflectance Sensor: 1-Channel, 5mm Wide, Analog Output
	QTR-HD-01RC Reflectance Sensor: 1-Channel, 5mm Wide, RC Output
	QTR-MD-01A Reflectance Sensor: 1-Channel, 7.5mm Wide, Analog Output
	QTR-MD-01RC Reflectance Sensor: 1-Channel, 7.5mm Wide, RC Output
	QTR-HD-31A Reflectance Sensor Array: 31-Channel, 4mm Pitch, Analog Output
	QTR-HD-31RC Reflectance Sensor Array: 31-Channel, 4mm Pitch, RC Output
	QTRX-HD-01A Reflectance Sensor: 1-Channel, 5mm Wide, Analog Output, Low Current
	QTRX-HD-01RC Reflectance Sensor: 1-Channel, 5mm Wide, RC Output, Low Current
	QTRX-MD-01A Reflectance Sensor: 1-Channel, 7.5mm Wide, Analog Output, Low Current
	QTRX-MD-01RC Reflectance Sensor: 1-Channel, 7.5mm Wide, RC Output, Low Current
	QTRX-HD-31A Reflectance Sensor Array: 31-Channel, 4mm Pitch, Analog Output, Low Current
	QTRX-HD-31RC Reflectance Sensor Array: 31-Channel, 4mm Pitch, RC Output, Low Current
	QTRXL-HD-01A Reflectance Sensor: 1-Channel, 5mm Wide, Analog Output, Long Range
	QTRXL-HD-01RC Reflectance Sensor: 1-Channel, 5mm Wide, RC Output, Long Range
	QTRXL-MD-01A Reflectance Sensor: 1-Channel, 7.5mm Wide, Analog Output, Long Range
	QTRXL-MD-01RC Reflectance Sensor: 1-Channel, 7.5mm Wide, RC Output, Long Range

I’m super excited to announce our newest product, the Robot Arm Kit for Romi. The Romi arm is designed to mount to the back half of a Romi chassis with two fixed servos controlling the height and angle of the gripper through a nifty linkage system.

The Romi with Robot Arm and various electronics to enable RC control.

Side view of the Romi with Robot Arm and various electronics to enable RC control.

The gripper itself uses a micro servo with two parallel fingers or paddles that open and close through a rack and pinion arrangement. Here is a quick video demonstration of a Romi chassis with the arm attachment:

You can see the available range of motion in the drawings below:

Range of motion of the height of the Robot Arm for Romi.

Range of motion of the wrist tilt on the Robot Arm for Romi.

Range of motion of the gripper on the Robot Arm for Romi.

The kit ships with all mechanical parts, including special servos with a fourth wire for reading the position of the output shaft:

Contents of the Robot Arm Kit for Romi.

We are also making the gripper used on the arm available as a standalone Micro Gripper Kit with Position Feedback Servo. Here is a picture of the assembled gripper:

Fully assembled Micro Gripper with Position Feedback Servo.

Products like this arm kit, with many injection-molded components, are some of the most complicated and time-consuming products we make. As those of you who have followed our growth over the past decade are probably aware, we try to develop our more complete robot kits incrementally, starting with components like just a wheel or a motor bracket, and then using those components in the more integrated robots. For example, we came out with this line of wheels in 2010:

Pololu Wheels with 90, 80, 70, and 60 mm diameters in three colors: blue, red, and yellow.

The Romi and Balboa robots, which use those wheels, did not come out until 2016 and 2017.

Romi Chassis Kit – Blue.

One of the many possible configurations of the bumper cage on the Balboa 32U4 Balancing Robot.

If you look at the parts that go into just the gripper portion, you can see that each of the components is roughly as complicated as one of those wheels, and you can’t really do much with just one of those parts:

Contents of the Micro Gripper Kit with Position Feedback Servo.

So, a lot of work goes into designing these kits. We also do not machine the molds or do the injection molding in-house (we did that on the first few parts for the 3pi robot), so that adds a lot of delays compared to our electronics boards, which we make in the same building that we design them in. We do 3D print prototypes to maximize the chances that we get the designs right, but there are invariably little modifications that we end up having to make when the components are this complicated, which is why it takes us years to go from the initial idea to the released kit.

We are at least sticking to our incremental product release approach as far as integration with electronics goes: at the time of the Romi arm attachment release, we do not have a specific solution for controlling the robot, which we will be working on next. Therefore, this kit is currently intended for advanced users who are comfortable powering and controlling several servos on their own.

As with all of our new product releases this year, we are offering substantial introductory discounts for the first customers to try out our new designs. You can use coupon code ROMIARMINTRO to get the whole arm for just $49 and code GRIPPERINTRO to get just the gripper for only $13. Each coupon is limited to 100 uses and 3 units per customer.

Related products

	Robot Arm Kit for Romi
	Micro Gripper Kit with Position Feedback Servo

All the student engineering interns we had over the summer from out-of-town colleges are headed back to school, so I get to announce the release of products they worked on over the summer. The new QTR sensors we are releasing today include the 15-channel version laid out by seventeen-year-old Chris H.

Hadouken! (2018 summer engineering intern Chris couldn’t come up with a clever pun to use for this picture of him posing with a circuit board he designed.)

You can see more about our new line of QTR reflectance sensor arrays in the first blog post I wrote about them a few weeks ago. One cool design and manufacturing aspect I did not mention then is that we designed these boards so that they could be populated at various densities. For example, that lets us make an 8-channel version with 8 mm sensor pitch on the same board that also works as a 15-channel array with 4 mm sensor pitch:

QTRX-MD-08RC Reflectance Sensor Array.

Here are some diagrams showing some of the thought that went into the soon-to-be released 31-channel version, which can also be populated to be an 8 mm pitch, 16-sensor array; a 12 mm pitch, 11-channel array; and a 20 mm pitch, 7-channel array:

Diagram of emitters and drivers on a QTR-HD-31x sensor array board with all sensors populated.

Diagram of emitters and drivers on a QTR-HD-31x sensor array board with 1/2 sensors populated.

Diagram of emitters and drivers on a QTR-HD-31x sensor array board with 1/3 sensors populated.

Diagram of emitters and drivers on a QTR-HD-31x sensor array board with 1/5 sensors populated.

With so many combinations of sensor types and output circuits, we won’t make every one of the possible arrangements a stock product, but the idea is that if you have an application where a particular sensor pitch is ideal for you, we can quickly make some for you without having to lay out new PCBs.

We expect eight channels on an 8 mm pitch to be a popular variant, so those will be stock products. We have also added the corresponding 4-channel version (using the same boards used for the full-density, 7-channel product), so this new product announcement covers twelve new stock sensor arrays:

QTR-HD-15RC Reflectance Sensor Array QTR-HD-15A Reflectance Sensor Array QTRX-HD-15RC Reflectance Sensor Array QTRX-HD-15A Reflectance Sensor Array	QTRX-HD-15RC Reflectance Sensor Array.
QTR-MD-08RC Reflectance Sensor Array QTR-MD-08A Reflectance Sensor Array QTRX-MD-08RC Reflectance Sensor Array QTRX-MD-08A Reflectance Sensor Array	QTRX-MD-08RC Reflectance Sensor Array.
QTR-MD-04RC Reflectance Sensor Array QTR-MD-04A Reflectance Sensor Array QTRX-MD-04RC Reflectance Sensor Array QTRX-MD-04A Reflectance Sensor Array	QTRX-MD-04RC Reflectance Sensor Array.

Our introductory promotions are still going strong! Be one of the first 100 customers using coupon code QTRINTRO and snag any of these new sensors at half price! (Limit 3 per item per customer.)

Related products

	QTR-HD-15RC Reflectance Sensor Array: 15-Channel, 4mm Pitch, RC Output
	QTR-HD-15A Reflectance Sensor Array: 15-Channel, 4mm Pitch, Analog Output
	QTRX-HD-15RC Reflectance Sensor Array: 15-Channel, 4mm Pitch, RC Output, Low Current
	QTRX-HD-15A Reflectance Sensor Array: 15-Channel, 4mm Pitch, Analog Output, Low Current
	QTR-MD-08RC Reflectance Sensor Array: 8-Channel, 8mm Pitch, RC Output
	QTR-MD-08A Reflectance Sensor Array: 8-Channel, 8mm Pitch, Analog Output
	QTRX-MD-08RC Reflectance Sensor Array: 8-Channel, 8mm Pitch, RC Output, Low Current
	QTRX-MD-08A Reflectance Sensor Array: 8-Channel, 8mm Pitch, Analog Output, Low Current
	QTR-MD-04RC Reflectance Sensor Array: 4-Channel, 8mm Pitch, RC Output
	QTR-MD-04A Reflectance Sensor Array: 4-Channel, 8mm Pitch, Analog Output
	QTRX-MD-04RC Reflectance Sensor Array: 4-Channel, 8mm Pitch, RC Output, Low Current
	QTRX-MD-04A Reflectance Sensor Array: 4-Channel, 8mm Pitch, Analog Output, Low Current

We have just released our USB 2.0 Type-C Connector Breakout Board. The Type-C connector has become increasingly common on devices like smartphones and notebook computers over the past few years, and it offers a number of interesting improvements over the legacy USB A and B connectors it is supposed to replace.

One of the most noticeable features is that the connector is reversible: you can plug a Type-C cable into a receptacle with either side up, and since Type-C ports can be used for both USB hosts and USB devices, the two ends of the cable can be interchangeable too. The USB-C specification also provides for negotiation of increased power (up to 20 V and 5 A) and alternate uses of the USB interface wires.

All of this flexibility comes at a cost. The Type-C connector itself, which measures about 1 cm (0.4″) square, has 24 separate tightly-packed pins:

• 4 power pins (VBUS)
• 4 ground pins
• 4 USB 2.0 data pins (D+ and D−, each duplicated for reversibility)
• 8 USB 3.1 SuperSpeed data pins
• 2 configuration pins
• 2 auxiliary (sideband) pins

Making all the required connections for a prototype or hobby project is therefore a much more daunting task with a USB-C receptacle compared to a Type-A or Type-B connector with only 4 or 5 pins. This is where our Type-C connector breakout board comes in, exposing all the pins necessary for USB 2.0 communication along a row of 0.1″-spaced holes. (Note that the board does not break out the USB 3.1 SuperSpeed differential pairs.)

If you are designing something that uses USB-C, you also need to consider what to do with the Configuration Channel (CC) pins. These pins are used to determine the role of a port when it is connected—whether it is a USB host or device, and whether it provides or consumes power—and they are also used to configure more advanced functionality like higher-voltage power delivery and alternate modes that allow other protocols over the USB interface.

Since we expect many users of this breakout board to employ it as a USB device port, we populate the board with pull-down resistors on the CC pins that make it a straightforward replacement for a Type-B, Mini-B, or Micro-B port. If you have a different application in mind, you might want to disconnect or remove the resistors yourself, or you can contact us about customizing the termination resistors.

We are interested in hearing any feedback you might have about the USB Type-C connector in general, this board in particular, and any follow-on boards you would like to see. Are you excited about using Type-C connectors instead of Micro-B? Would you have a use for the USB 3.1 SuperSpeed pins brought out to 0.1″-spaced holes? Do you want something with an on-board configuration controller that makes it easier to set up USB Power Delivery or other advanced functionality? Please share your thoughts in the comments below.

As with all our new products this year, we are offering a special introductory promotion. You can get up to three of the new breakout boards for just $1.92 each, limited to the first 100 customers using coupon code USBCINTRO.

Related products

USB 2.0 Type-C Connector Breakout Board (usb07a)

Today we are finally releasing our new U3V70x family of boost regulators, which are now our highest-current boost regulators. (I said “finally” because we have had the boards designed for over six months, but we just finally received the main ICs for our production builds even though I ordered them last year.) Besides supporting the most current of any of our boost regulators, we also have an adjustable version with a multi-turn trimmer potentiometer, which makes setting the output voltage to a particular value much easier than when the whole output voltage range is represented by the 250 degrees or so of a single-turn pot. The regulators operate with input voltages down to 2.9 V, and the adjustable output version can be set to an output in the range of 4.5 V to 20 V. Talking about the current on boost regulators is tricky since it’s so dependent on input and output voltages, so it’s best to just show you a few performance graphs:

Typical efficiency of Step-Up Voltage Regulator U3V70x, Vout = 12V.

Typical maximum continuous output current of Step-Up Voltage Regulator U3V70x.

For those who don’t need adjustability (that multi-turn pot is expensive!), we offer fixed-voltage versions in six standard voltages:

• U3V70F5: Fixed 5V output
• U3V70F6: Fixed 6V output
• U3V70F7: Fixed 7.5V output
• U3V70F9: Fixed 9V output
• U3V70F12: Fixed 12V output
• U3V70F15: Fixed 15V output

We can also make customized fixed versions for you with other voltages between 4.5 V and 20 V.

Comparison of the newer U3V70A boost regulator (top) to the older U3V50ALV (bottom).

It’s exciting that these new regulators are smaller than what used to be our highest-power boost regulator (the U3V50x family) despite handling more current. One way we kept the size smaller is by using only ceramic capacitors. One consequence of that is that the new regulator outputs are slightly noisier, so if that is important for your application, you might want to add some external capacitors to further smooth out the voltage. The older design also supports a higher maximum output voltage, so if you need more than 20 V, our U3V50F24 fixed 24 V and U3V50AHV adjustable 9 V to 30 V units are still our highest-power options.

As with all our new products this year, we are offering a special introductory promotion. You can get up to three of each version for just $9 (which is an especially good deal for the adjustable regulator!), limited to the first 100 customers using coupon code U3V70XINTRO.

Related products

	4.5-20V Fine-Adjust Step-Up Voltage Regulator U3V70A
	5V Step-Up Voltage Regulator U3V70F5
	6V Step-Up Voltage Regulator U3V70F6
	7.5V Step-Up Voltage Regulator U3V70F7
	9V Step-Up Voltage Regulator U3V70F9
	12V Step-Up Voltage Regulator U3V70F12
	15V Step-Up Voltage Regulator U3V70F15

Some of the Pololu summer 2018 student engineering interns posing with QTR HD circuit boards they designed.

Hi everyone! My name is Matthew, and I am one of nine student engineering interns working at Pololu this summer. As I was preparing to head back to MIT for my sophomore year of studying Mechanical Engineering, I was graciously inflicted with the responsibility of announcing our second wave of high-density QTR reflectance sensor arrays. These two- and four-sensor boards, along with all of the other soon-to-be-released QTR sensor arrays, were designed by us student interns. For many of us, these boards were the first we ever routed, so it’s especially exciting to see them be real products going out into the world. While I did not personally lay out any of the boards being released today, we all thoroughly cross-checked each other’s work (the first board I directly routed should be released next week).

Because of their small size, these boards have one LED brightness control pin. All boards with more than four sensors will have separate LED brightness control for odd-numbered and even-numbered LEDs.

As Jan mentioned in the first blog post introducing this line of sensors, each board is available in analog and RC configurations and with two different sensor types. This post therefore covers the release of eight new products:

• QTR-HD-02RC Reflectance Sensor Array
• QTR-HD-02A Reflectance Sensor Array
• QTRX-HD-02RC Reflectance Sensor Array
• QTRX-HD-02A Reflectance Sensor Array
• QTR-HD-04RC Reflectance Sensor Array
• QTR-HD-04A Reflectance Sensor Array
• QTRX-HD-04RC Reflectance Sensor Array
• QTRX-HD-04A Reflectance Sensor Array

We have also released an update to our QTR Arduino library for use with these new QTR sensor arrays.

As we have been doing with all our new products this year, we are offering an extra special introductory discount on these boards! The first 100 customers using coupon code QTRINTRO will get half off on up to three of each sensor.

Related products

	QTR-HD-02RC Reflectance Sensor Array: 2-Channel, 4mm Pitch, RC Output
	QTR-HD-02A Reflectance Sensor Array: 2-Channel, 4mm Pitch, Analog Output
	QTRX-HD-02RC Reflectance Sensor Array: 2-Channel, 4mm Pitch, RC Output, Low Current
	QTRX-HD-02A Reflectance Sensor Array: 2-Channel, 4mm Pitch, Analog Output, Low Current
	QTR-HD-04RC Reflectance Sensor Array: 4-Channel, 4mm Pitch, RC Output
	QTR-HD-04A Reflectance Sensor Array: 4-Channel, 4mm Pitch, Analog Output
	QTRX-HD-04RC Reflectance Sensor Array: 4-Channel, 4mm Pitch, RC Output, Low Current
	QTRX-HD-04A Reflectance Sensor Array: 4-Channel, 4mm Pitch, Analog Output, Low Current